FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
66/67 hood mount
Anybody seen studs for mounting the hood on a 67? This is a very early 67.
|
#2
|
||||
|
||||
My 67 uses bolts on both ends of the hood hinges, I believe my buddy's 66 is the same.
__________________
1967 GTO, 432 (428+.030), 4-bolt mains, factory Nodular crank, scat rods, icon dished pistons, Lunati HR 243/251@.050, .618/.622 lift, Edelbrock 72cc round port heads, 10.5:1, offy 2-4 intake, Edelbrock 650cfm carbs, Super T10 trans (2.64 first), BOP 10 bolt w/ Eaton posi and 3.36 gears |
#3
|
||||
|
||||
Mine is a 12/66 build date and uses the bolts.
__________________
Andy North Carolina 1967 GTO SG over Parchment / mom original owner / sold in '78 / found 35 years later |
#4
|
||||
|
||||
My understanding is 65-66 used studs, and 67 used bolts. My 66 has studs. That being said, I can't say whether the stud setup was carried over into early 67 or not...
Importsmasher
__________________
Scott Baggiore 66 GTO convertible 389/4 speed (parents bought new) 73 Firebird Formula 400/4 speed 74 GTO 455/4 speed 74 Grand Am |
#5
|
||||
|
||||
Had a real early 67, it used bolts.
|
#6
|
|||
|
|||
Invoice date on this car is 10/25/66 so I assume manufacture was in Oct sometime.
|
#7
|
||||
|
||||
My 3rd week of March build for my 66 GTO is studs too.
__________________
Gary Get in, ShuT Up, Hang On! Member of the Baltimore Built Brotherhood MY GTO built 4th Week of March 1966 "Crusin' Is Not A Crime" Keep yer stick on the ice. |
#8
|
||||
|
||||
well the 65-67 hood was the same the 65-66 used sruds and 67 used bolts
|
Reply |
|
|