| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-10-2022, 07:31 AM
|
||||
|
||||
Quick cam suggestions ?
I've run in a fresh 462 and ran into a oil pan leak , valley pan leak and a light coating of milky substance on the inside of the valve covers.
Needles to say I removed the engine and am in the proces of taking it apart again. I've always been wary about the XE274H cam in the build ( negative posts ). The problems I'll address but , I've been searching thrue a lot of posts about a fitting cam and I only get more confused about the load of info to absorb. My goal was 500 hp So now that it's on the engine stand and I need to order parts anyway , any quick suggestions on the cam ? 462 , BRC pistons , eagle rods , eagle cast crank. KRE D-ports cleaned up and 2.11/1.66 valves , Harland Sharp 1.5 RR Q-jet modified according to Cliffs instructions , RPM intake. Everything port matched , Hedman 1 3/4 headers. TH400 / TCI converter stall 2000 , 3.31 : 1 gears. |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode