[Craig Hendrickson]

Originally Posted by KEN CROCIE

(snip) Put a spacer or square bore on it and mixture goes haywire. In an attempt to improving the performance of our SS/KA SD,The manifold was modified and even in it's double back form ,it is no match for a T2 or Victor.

Very true, about a plain spacer or square-bore. On our SS/KA SD-455, we used a race ported T1 and the "Rocket Box", which is anything BUT a plain spacer. The combination worked well enough to set an NHRA National Record in 1977. As far as the "double back" version, we never ran one, but IIRC Billy Joe Moravitz did in addition to Don Kennedy. The intake manifold of choice back then was the Dough Nash (Warrior), if you could find one! IIRC, John Angeles and Art Peterson both ran a Nash at that time.

[Big Injun]

The infamous "Rocket Box". Yestertech that works!

[Craig Hendrickson]

Originally Posted by Big Injun

The infamous "Rocket Box". Yestertech that works!

In case you missed it, here's the thread from a couple of years ago describing the H-O Racing "Rocket Box".

http://forums.maxperformanceinc.com/...d.php?t=662725