FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Got a holley 750 vac secs electric choke dont know how to hook it up? Also dont know where all the vac lines go? can someone help a rookie out! thanks
|
#2
|
|||
|
|||
Got a holley 750 vac secs electric choke dont know how to hook it up? Also dont know where all the vac lines go? can someone help a rookie out! thanks
|
#3
|
|||
|
|||
You can do a computer search for Holley.(www.holley .com)They have a help line that might be able to help.They also have a phone number to call.Good luck. John
|
#4
|
|||
|
|||
The electric choke should be hooked to a source that's energised when the ignition is on..
Vaccum ports.. large one on the back of the base plate I run to my power brakes. small on the front of the base plate is full manifold vaccum.. I hooked it to my trans modulator. small on the front metering block.. ported vaccum.. hook to the vaccum advance on the dist. GURU: One who knows more jargon than you Scott Schering 70 Firebird 455 12.34 @ 108.2 Http://www.pontiacs.org
__________________
William's Law-- There is no mechanical problem so difficult that it cannot be solved by brute strength and ignorance. Scott Schering Http://www.pontiacs.org |
Reply |
|
|