[brockb455]

Does anyone have pictures or the assembly manual that shows the routing for the engine and front wiring harness for my 73 TA? I have all new harnesses but need to know the correct routing. Sorry for all the stupid questions.

[Formulabruce]

Lighting goes across Drivers fender, through a rectangle plastic in the upper corner of the Core support, across front with hangars on the core, and through another plastic rectangle to the side light on pass side.
The engine side goes over the booster, wipers,some down the engine intake edge. ( should be bundled for that) rest over to oil sender, coil, I will look for a good pic

[brockb455]

Originally Posted by Formulabruce

Lighting goes across Drivers fender, through a rectangle plastic in the upper corner of the Core support, across front with hangars on the core, and through another plastic rectangle to the side light on pass side.
The engine side goes over the booster, wipers,some down the engine intake edge. ( should be bundled for that) rest over to oil sender, coil, I will look for a good pic

Thanks bruce, pictures would be helpful for the details.

[Tunas73TA]

Not sure these help, but..
Check my sig for more pics...like this:
Page 20 or so

[Lloyd-TX]

I'll bite, but need to know - A/C or not? Stick or auto?

[Lloyd-TX]

11 pages total, so no big deal.

Here are the first five . . .

[Lloyd-TX]

and the next five . . .

[brockb455]

Originally Posted by Lloyd-TX

I'll bite, but need to know - A/C or not? Stick or auto?

non AC, auto

[Lloyd-TX]

Oops - there's one sort of duplicate in the bunch, so here are the final TWO pages.

Hope these help, Brock. If you'd like the full sized scans, e-mail me bell-auto@comcast.net and I'll reply back with them.

[brockb455]

Thanks gentlemen, much appreciated.

[superdutybob]

Lloyd rocks!

Nice job!

[Lloyd-TX]

Originally Posted by superdutybob

Lloyd rocks!

Nice job!

Thanks, Bob - it's nice to be appreciated!

Only took me the better part of an hour to research, print, scan, save and post . . .