FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
D port header gasket
Who makes the best d port header gasket for 65 389 ? Thanks Bill
|
#2
|
|||
|
|||
Reflex.Tom
|
#3
|
|||
|
|||
Reflex,sorry
|
#4
|
|||
|
|||
Hate spell check!Remflex
|
#5
|
||||
|
||||
|
#6
|
||||
|
||||
To help ease there install hang the Headers on all the bolts first ,then cut the gaskets into 3 sections ( each end port and the middle ) then notch / cut each bolt hole from the bottom of each bolt hole and then slide them in place while rocking the header.
This method also helps the gasket to not tare as the weight of the Exh system hanging off of them makes the Header shift in shape some over time. Be sure to use antiseize on all the bolts and to check all the bolts for tightness after the first 3 heat up and cool down sessions.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#7
|
|||
|
|||
If using the Remflex,be VERY careful trying to cut them.They are the best I have found but if bent can crack and end up in the trash.Tom
|
#8
|
||||
|
||||
Very true. Quite brittle. I use a razor utility knife.
|
#9
|
|||
|
|||
best headed gasket
Thanks for all the replies ! would like to do this for the last time Bill
|
Reply |
|
|