| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
03-11-2024, 07:37 AM
|
||||
|
||||
55mm cam and simms timing chain set up
i did some quick measuring and have reached out to Scott Simms, but in the meantime. has anyone installed a simms set up on a 55mm roller cam WITH roller 55mm bearings?
My cam measures 54.7x mm and the relief in the cam end plate is 55mm so i believe it will work as designed, and ride on the roller bearing so long as it is assembled appropriately. The roller cam bearing race is out side of the cam plate, but i dont think that will be an issue. Thanks in advance
__________________
1969 carousel red firebird 455, richmond 5 speed 1964 540 gto 1971 lemans sport convertible 1972 Maverick under slow construction |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode