FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Northeast Connecticut | Delaware | Maine | Maryland | Massachusetts | New Hampshire | New Jersey | New York | Pennsylvania | Rhode Island | Vermont | West Virginia |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
SATURDAY NOV 3 BOP race ATCO new jersey
whos going
__________________
2008KRE Q16 Winner 2014 atco raceway doorslammer winner 86 grand am tube car 8.95 @152 455 eheads solid flat tappet cam Hoffman Racing building and racing Pontiacs for 35 years |
#2
|
|||
|
|||
I am interested in bringing a few of our goats to run. non run in the 8s but we have fun.
|
#3
|
||||
|
||||
Fuel lines
Need my tank sumped, fuel lines, etc. Do you know anyone who does that kind of work?
|
#4
|
|||
|
|||
sump things are not that hard
I have put a sump in my z28 recently, but I was not going to play with a old tank. (I weld diesel tanks all day long, but gas... I had a bad experiance when I was much younger with a used tank) Gas tanks these days are fairly cheep so why not do it right from the get go? I bought a new tank and sump kit from summit. easy directions on the cutting template, then tig welded the sump to the bottom of the tank. You can mig weld, but heat is a problem with the thin metal a gas tank is made of. the instructions recomend using a liquid tank sealer, like a eastwood product after you are finished. A good tig job most likely would not require that step? I would think if you gathered up the parts and even did the cutting of the required holes you could easly find a welding shop that would do an excelent job in NYC. The prep work takes the time so if you have the holes layed out and cut, the sump positioned and marked where it is to be welded, that would save you some shop time. The welding may be an hour or so depending on the shop.
|
#5
|
||||
|
||||
Shop I work at does welding all old muscle car repair
__________________
2008KRE Q16 Winner 2014 atco raceway doorslammer winner 86 grand am tube car 8.95 @152 455 eheads solid flat tappet cam Hoffman Racing building and racing Pontiacs for 35 years |
#6
|
||||
|
||||
Not racing, but I'll be there.
__________________
1978 Pontiac Grand LeMans.......out next year Previous - 2001 Jerry Haas-built P/S Grand Am - former WJ car, Hoffman Racing 535" IA2, Tiger Heads/Intake, Single Dominator, PG Best ET: 7.776 @ 175.94, 1.096 60', 2375 lbs. |
#7
|
||||
|
||||
Where? What's it called?
Thnx |
#8
|
||||
|
||||
New Hyde park moonlight garage
__________________
2008KRE Q16 Winner 2014 atco raceway doorslammer winner 86 grand am tube car 8.95 @152 455 eheads solid flat tappet cam Hoffman Racing building and racing Pontiacs for 35 years |
#9
|
||||
|
||||
just thought i would bump this up and ask the old question, who is going?
__________________
1967 RAM AIR GTO 1 OF 156 AUTOMATICS |
#10
|
|||
|
|||
Atco NJ Nov 3 in past it was pontiac show and raceing this year it seems to be BOP. Good time in the past should be good time with the BO's too.
|
#11
|
|||
|
|||
Last year it was mighty cold but it was a great show. Lots of cars showed up and lots of racers also. As long as there is no rain in the forcast it is a great event for the day.
We will be there set up as a vendor. CustomAutoApparel.com Come and see us there. It is our last show of the year. Chris |
#12
|
||||
|
||||
Will be there in a 62 Tempest. This is a great show to cap off a season!
Attached is the show flyer. |
#13
|
||||
|
||||
i dont race, but i'll be there.
|
#14
|
||||
|
||||
Plan on being there racing.
joe |
#15
|
|||
|
|||
I am going for sure, and thinking of racing my 70' GTO......I have a friend that wants a 66 or 67 GTO that said he's coming down from the Poconos.
Anyone have 1 for sale thats coming? He wants a nice clean driver with modern brakes, A/C ect. He's not interested in a 100 pt #'s car. Thanks Dave |
#16
|
|||
|
|||
Im going.Not sure if im bringing a car yet
|
#17
|
|||
|
|||
plan be at BOP Nov 3
If all goes as planned will have 4 cars there, three for track one for show. 69 judge 68 gto 67gto and 69 firebird.. Nothing radical but we have fun.
|
#18
|
||||
|
||||
Ill be there sans car.
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09 |
#19
|
||||
|
||||
Not sure what's on the agenda so far but I'm hoping to be there.
Anyone know if the swap meet at Kowtown is that same weekend? I heard it's on Sunday 2 weeks from yesterday but not sure if it's on Saturday or not. I need to stop in and pick up some 800 degree engine paint, and I'd like to do that on the way up to Atco.
__________________
Gary Get in, ShuT Up, Hang On! Member of the Baltimore Built Brotherhood MY GTO built 4th Week of March 1966 "Crusin' Is Not A Crime" Keep yer stick on the ice. Last edited by GT182; 10-22-2012 at 10:57 AM. |
#20
|
||||
|
||||
Is this still gonna happen ? Did Sandy mess up the raceway?
|
Reply |
|
|