FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#241
|
||||
|
||||
Quote:
Tom V. I have known quite a few people who were held hostage by body shops over the years. They typically do not do much and then charge a bunch of money if they can't meet your time line for a finished product and you want to go elsewhere.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#242
|
||||
|
||||
Tom it was truly awful. I mean my one armed nephew could have done better. He actually tried to tell me that he couldn’t pull the dent 6 inches from the eyebrow because he needed it on the car for leverage and to make sure the edge didn’t get too out of round for the headlight bucket
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#243
|
||||
|
||||
Well the Trans came today. Sent out all the trim etc. to be redone today too. Just the trans came. Still waiting on the clutch and the rest of the kit. A little nervous about sending out all my trim. If something happened to it I’d be screwed. Anyway that’s where we are now.
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#244
|
||||
|
||||
It’s going down today
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#245
|
||||
|
||||
Awesome! Take some photos along the way and post 'em here afterward.
__________________
1966 Pontiac GTO (restoration thread) 1998 BMW 328is (track rat) 2023 Subaru Crosstrek Limited (daily) View my photos: Caught in the Wild |
#246
|
||||
|
||||
did you fill the holes on the belt line trim thats what makes a tempest
|
#247
|
||||
|
||||
Already filled
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#248
|
||||
|
||||
I just want everyone to know the TKO600 went in with no cutting other than the shifter hole. Mockup on the ground said I could run the PF24 but I can’t because of the control arm pocket so I need the shortest filter that is made if anyone can tell me. Also the Canton dipstick may not work so if anyone knows a Lokar flexible that will thread into the oil pan I would appreciate the info. Plus I need a clutch pushrod that is longer than 7 inches. Other than that I am exhausted.
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#249
|
||||
|
||||
bummer on the trim otherwise nice project hope your keeping the gold interior
|
#250
|
|||
|
|||
OK,now go back and check everything to be sure you can get it out once the front end and everything else is in.You dont want to find out that you will have to do cutting to pull the trans if you have a flywheel boat issue.When you get the exhaust ready be sure you can get it out if you have a H or a X pipe.I had to cut mine out to get mine out.Tom
|
#251
|
||||
|
||||
I’m gonna use clamps on the X and weld everything else. I didn’t weld the tunnel porch I screwed it down so I can get to the top on at least the shifter. Everything seems to be good except the dipstick. Canton has a flexible one so I’m gonna try it.
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#252
|
|||
|
|||
Just take good measurements how far back the trans has to go to be able to drop it out.Tom
|
#253
|
||||
|
||||
Anybody got any ideas on a pushrod
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#254
|
||||
|
||||
I don’t like the trim and the interior is gonna be the dark blue. Outside is silver.
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#255
|
|||
|
|||
Make one or lengthen the one you have? Sent from my iPhone using Tapatalk Pro |
#256
|
||||
|
||||
I don’t trust my welding ability enough to trust lengthening it and the only threaded rod I could find doesn’t look like it would hold up.
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#257
|
||||
|
||||
I paid the upgrade fee for an aluminum driveshaft
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#258
|
||||
|
||||
Quote:
__________________
"No replacement for displacement!" GTOAA--https://www.gtoaa.org/ |
#259
|
||||
|
||||
The diagram in the manual shows the clutch return spring hooked to the clutch fork and to the bracket on the exhaust manifold. For those of you running headers what are you hooking the spring too?
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#260
|
||||
|
||||
Lost 5 HP today. Had to use a Ford 351 Windsor dipstick because it was the only one I could find that came out in the right place from the pan fitting thru the headers. The bracket was wrong so I still have to fab up one to clench it to the valve cover stud.
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
The Following User Says Thank You to 64speed For This Useful Post: | ||
Reply |
|
|