FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Form an E-85 compatible Intake gasket with the right stuff 90 minute?
Hey Guys,
Even after milling the intake manifold .050 on each side - I still have an .100 - .125 intake port mismatch (Top of Port) from heavily milled heads and decked block – with the intake manifold being too high. Motor is running and assembled without intake on. Can I use "the right stuff 90 minute" formula to form an E-85 compatible gasket? Thanks, Craig |
|
|