| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-16-2024, 02:31 PM
|
||||
|
||||
A body accelerator pedals
Cobbling something together…
Specifically 69-72 A bodies, 4bbl, thm400. Appears the cable changed in 71 from a 2 screw to the firewall/pin and clip pedal to a “snap” into the firewall with a captured nubbie in the pedal. The pedal mount to firewall appears to be the same across all 4 years so my question is….are the kickdown brackets the same across all 4 years as well as the pedal geometry? Can I put a 71/72 pedal in place of the factory 69 one, along with correct cable, and go to town? Will be using a 72 intake along with its correct accelerator cable bracket in my 69. Thx
__________________
costs too much |
|
#2
04-16-2024, 04:46 PM
|
||||
|
||||
|
I don’t know the details of that part of the set up, I do know that in terms of the pedal itself auto trans cars had the chrome trim around the pedal, mt cars did not,
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
| The Following User Says Thank You to steve25 For This Useful Post: | ||
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
