FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
speedo adapters
I have these two adapters here;
There are not the more common (at least more common type I have seen) which are the compact rectangular ones which seems to have a built in cable(?); I am guessing that these ones require a speedo cable which is longer than the cable housing - is this correct? It's either that, or I need something else to connect the speedo cable from my car to the gear in my transmission. Can anyone confirm what I need to do to use these? I am incline to use the longer of the two at a later point, because it would allow me to run all the factory stuff for my (3.55:1 geared) car, but run a 3.90:1 gear set; At least that's how my math works out. 3.90 x 0.909 = 3.55 This one (the longer of the two) has the following stamped on one of the circular end faces: 6476884 1:0.909 005 (upside down and small "M") 2 The other one has the following stamped on BOTH of the flat circular end faces: 1565210 1:0.866 043C1 Thanks in advance for helping me out!!
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
|
|