FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Setting RPM redline
So I got my engine running earlier this year and have a couple hundred miles on it. It’s running pretty good. I still want to get it properly tuned with a good timing curve and knowing what my air fuel ratio is and I would like to know what it’s putting out on a dyno.
Once that’s done, I’d like to set a proper redline but am unsure what that should be. This is a stroked 400 (461) it’s a forged crank (4.25” stroke) forged rods and forged pistons. Roller cam .541/.544 lift 230/236 duration @.050, 112 LSA. 6x-4 heads mild porting, stock intake and stock Qjet. Compression ratio is about 9.3:1 Using an MSD RTR dist with blaster 2 coil. Currently set rev limiter to 4,500 rpm. What would be a safe max rpm be? Thanks! Sent from my iPhone using Tapatalk
__________________
Let me have a Diablo sandwich and a Dr. Pepper and make it fast---I'm in a goddamn hurry! - Mike 1967 GTO |
|
|