 |
|
| SOLD Pontiacs The cars in here have already been sold. The topics will be kept for a few months for referance. |
|
|
Thread Tools | Display Modes |
|
#1
08-20-2009, 12:42 PM
|
||||
|
||||
1967 GTO PARTS CAR – Barn find $3,200
1967 GTO parts car that has been in dry storage since 1991. Car is almost complete. Only things missing are rear tail lights and rear bumper. No title.
Bad things about the car: Rear quarters, driver door, floor pan, trunk pan and frame are all bad. Good things about the car: Car is almost complete. Only things missing are rear bumper, tail lights and some SS wheel well and lower body SS trim. Has original numbers matching drive train with 400 YS engine, 670 heads, turbo 400 trans with open 8.2 rearend. All pulleys, brackets, p/s pump, etc. are there. Nothing missing. Front clip is good. Hood is very nice and straight. Lower fenders need patched. Straight bumper. Vinyl top trim and upper body SS and aluminum exterior trim is in excellent condition. Interior is complete. All interior trim parts are there. Very nice console, his/her dual gate Hurst shifter. Steering wheel is nice. Passenger door is good. Trunk lid is good. Dash is good. Glass is good. If entire car doesn’t sell in the next couple weeks, I will start parting out. Call or email me direct at billygoat1967@comcast.net or wfm2@pitt.edu or call 412 496-0619 cell, 412 279-1965 home, leave message. |
|
#2
08-20-2009, 01:09 PM
|
||||
|
||||
|
If it doesn't sell I'm interested in the vinyl top trim, the belt line trim, the steering wheel, and, depending on vent wing frames, maybe those too?
Frankly, for such a complete car I'd rather see you sell it though.
__________________
1967 GTO Tyrol Blue/Blk Cordova 400, TKO-600, 8.2 Posi w/3.55 400 + .020, decked to .005 SD Performance 240+CFM 670 heads RARE HO/RA manifolds RARE 2.5" Exhaust (18" Magnaflows) SD "Stump Puller" HR cam (230/236, 112LSA, 107.5 ICL) PRW stainless 1.52 roller rockers Forged TRW slugs SCAT H-Beam forged rods |
|
#3
08-20-2009, 03:33 PM
|
||||
|
||||
|
If it doesn't sell, I'm interested in the dual gate shifter and console. You can email me direct at terryhaut@mchsi.com when you know if the console and shifter is available separately. Thanks, Terry
|
|
#4
08-21-2009, 09:18 PM
|
||||
|
||||
|
67 Parts car
Billy Goat
If car doesn't sell, I am interested in the 670 Heads. The condition of the vehicle and the asking price is fair. I think you will probably have no problem selling the car whole. Rich
__________________
  If everything seems under control,your just not going fast enough. Mario Andretti ________________________________________ May God have mercy upon my enemies, because I Won't. General George Patton |
|
#5
08-25-2009, 09:21 AM
|
||||
|
||||
|
I had a couple inquiries about the date code on the engine. Engine casting # 9786133, date code M156, (Dec. 15, 1966). Also, only one tail light is missing, found the other in the trunk. I am going to attempt to get the engine started this week. It should run.
|
|
#6
08-26-2009, 04:02 AM
|
|||
|
|||
|
How are the:1) Grills and Surrounds? 2) Ralley Guages or..?? 3) carburator? 4) Air cleaner assembly? 5)radio AM or AM-FM? Thanks Larry Banks
__________________
Mr. President, you can't say Dallas doesn't love you " |
|
#7
08-27-2009, 10:00 PM
|
||||
|
||||
|
Car has been sold to my fiend Joe. He is going to part it out. You can email him at barber565@comcast.net He has a lot of 65-67 parts.
|
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
