 |
|
| Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
| Reply |
|
|
Thread Tools | Display Modes |
|
#1
05-25-2022, 12:46 PM
|
||||
|
||||
WTB: new or Used Pontiac 6.625 .980 pin bushed connecting rods
Anyone have a set of new or used Pontiac stock length and journal bushed .980 pin rods for sale? The old CAT, PPR or RPM I-beams would be just fine. Eagle or Scat H-Beam rods are overkill but I'll take what I can get.
__________________
 Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
|
#2
05-30-2022, 09:28 PM
|
||||
|
||||
|
Still hunting...
__________________
Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
|
#3
06-04-2022, 01:02 PM
|
||||
|
||||
|
TTT, Still L@@king.
__________________
Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
|
#4
06-04-2022, 05:08 PM
|
||||
|
||||
|
Connecting rods
I have a set of cast Pontiac pressed bushing rods taken from my 455 after rebuild. machine shop did not do anything to these except remove pistons/ bushings. I assume they are 6.625 standard rods.
|
| The Following User Says Thank You to West Coast GTO For This Useful Post: | ||
|
#5
06-09-2022, 11:42 PM
|
||||
|
||||
|
Quote:
__________________
Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
| The Following User Says Thank You to Johnny406 For This Useful Post: | ||
|
#6
06-14-2022, 11:51 AM
|
||||
|
||||
|
Still on the hunt
__________________
Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
|
#7
12-11-2022, 07:01 PM
|
|||
|
|||
|
Let me know if you are still looking. I have some nice, bushed rods. I'll have to ck if they are forged. If this is for your 463 T/A car, let me know the max rpm that you take it to.
|
|
#8
12-12-2022, 11:41 AM
|
||||
|
||||
|
I have a set of Eagle 4340 6.625" 3D rods that were originally pressed pin that were converted to bushed. I would recommend getting them rebushed before using.
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
