#1  
Old 01-25-2022, 03:18 PM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Location: Canada
Posts: 3,078
Default Electric water pump

Question on Electric water pump. I installed one on our 505 cu in. I wondering what the consensus is in regards to leaving the thermostat in? I'm running a 160 deg thermostat.
A racer friend say to remove the thermostat or it would burn out the pump.
My thinking is would be nice to leave thermostat in so engine warms up quicker and we can always cool it down at the track to 160 with pump and fans. We do run electric fans. I do have some of the thermostat restriction plates to try also.



Thanks in advance for any advice.

__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
  #2  
Old 01-25-2022, 03:37 PM
Steve C. Steve C. is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Liberty Hill, Tx. (Austin)
Posts: 10,385
Default

Years ago I spoke with Jay Cason at Meziere and was told not to run a thermostat. I never have. Since then I've seen various conversations regarding this and with mixed opinions.

Some suggest remove the thermostat and install a plate restrictor. Don't run the water pump dead headed.

.

__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 )
Old information here:
http://www.hotrod.com/articles/0712p...tiac-trans-am/

Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine)
5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension
https://www.youtube.com/watch?v=qDoJnIP3HgE

Last edited by Steve C.; 01-25-2022 at 03:46 PM.
  #3  
Old 01-25-2022, 03:37 PM
Scott65's Avatar
Scott65 Scott65 is offline
Ultimate Warrior
 
Join Date: Jan 2002
Location: Houston, Texas
Posts: 1,991
Default

You could always do both. Pull the Stat, and have the pump only come on after 140-150.

__________________
'65 Tempest 467 3650# 11.30@120.31
  #4  
Old 01-25-2022, 03:50 PM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Location: Canada
Posts: 3,078
Default

Thanks Steve. I would take that advice as pretty solid. Now to wonder why.

__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
  #5  
Old 01-25-2022, 03:55 PM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Location: Canada
Posts: 3,078
Default

Thanks Scott. Didn’t even cross my mind duh. Lol. Anyhow, I have it setup on a relay to turn pump on as soon as engine starts and then I have a switch to over ride when engine off to cool it down after a 1/4 mile run. I haven’t tested yet so I’m not sure how the setup is gonna work. Had no issues with heat with mechanical pump and 160 thermostat last season.
Thanks for info.

__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
  #6  
Old 01-25-2022, 04:55 PM
Scott65's Avatar
Scott65 Scott65 is offline
Ultimate Warrior
 
Join Date: Jan 2002
Location: Houston, Texas
Posts: 1,991
Default

I forgot to mention, if you're temperature probe is in the intake crossover, start lower to verify. Temps in the block and temps in the intake crossover will be different with no circulation. Maybe have it turn on at 100, and see what you get.

__________________
'65 Tempest 467 3650# 11.30@120.31
The Following User Says Thank You to Scott65 For This Useful Post:
  #7  
Old 01-25-2022, 05:50 PM
Steve C. Steve C. is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Liberty Hill, Tx. (Austin)
Posts: 10,385
Default

Both my water pump and dual radiator fans are controlled by a on/off switch. When driving the water pump runs continuously.
The fans cycle on and off at a predetermined temperature. I have it written down somewhere, but if memory serves me right the fans come on at 185 degrees and off at 165 degrees.
In my case they are controlled by my fuel injection ECU with a sensor on the intake manifold crossover.


.

__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 )
Old information here:
http://www.hotrod.com/articles/0712p...tiac-trans-am/

Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine)
5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension
https://www.youtube.com/watch?v=qDoJnIP3HgE

Last edited by Steve C.; 01-25-2022 at 05:57 PM.
The Following User Says Thank You to Steve C. For This Useful Post:
  #8  
Old 01-25-2022, 06:32 PM
Steve C. Steve C. is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Liberty Hill, Tx. (Austin)
Posts: 10,385
Default

Opinion off the internet....

You really need to keep the water moving at all times, even if it's just recirculating in the block as the existing system does when cold. One good reason for setting it up this way-- it minimizes hot spots, and the circulation warms up the block more evenly than would be the case with no circulation.

That said, some control the pump speed based on RPM and/or Temp Differential so you still need a controller for that.


.

__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 )
Old information here:
http://www.hotrod.com/articles/0712p...tiac-trans-am/

Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine)
5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension
https://www.youtube.com/watch?v=qDoJnIP3HgE
The Following 3 Users Say Thank You to Steve C. For This Useful Post:
  #9  
Old 01-25-2022, 07:30 PM
misterp266's Avatar
misterp266 misterp266 is offline
Ultimate Warrior
 
Join Date: Jun 2005
Location: Raynham, MA
Posts: 1,790
Default

Following as I will be using a Meziere remote pump on my build.
I was thinking of adding an 8AN bypass hose from the crossover to the pump inlet side. I’m using a Moon front cover. May also add a couple of small holes in the thermostat. I have read that Meziere pumps don’t like PWM controls and also should not be deadheaded. And as Steve stated, water should be circulating all the time to prevent hot spots.

__________________
" Darksiders Rule "
The Following User Says Thank You to misterp266 For This Useful Post:
  #10  
Old 01-25-2022, 08:31 PM
punkin punkin is offline
Senior Chief
 
Join Date: Aug 2016
Location: Northern Colorado
Posts: 295
Default

I apologize if this is inappropriate. I don't mean to hijack the exchange but I may be learning something new here. I have installed a Merziere water pump with a 180 thermostat. Is this a bad thing given the t-stat will be closed until temp comes up? Is this bad for the pump?

__________________
1968 Firebird
IAIIa 522
340 E-heads
Northwind with XFlow TBI
4L80E
3.50:1 Rear
The Following 2 Users Say Thank You to punkin For This Useful Post:
  #11  
Old 01-25-2022, 08:45 PM
AG's Avatar
AG AG is offline
Ultimate Warrior
 
Join Date: Feb 2000
Location: NH
Posts: 3,240
Default

I run a 160 F T-stat in my race car with a Meziere electric water pump and it works fine.

__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule.
The Following User Says Thank You to AG For This Useful Post:
  #12  
Old 01-25-2022, 08:48 PM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Location: Canada
Posts: 3,078
Default

Quote:
Originally Posted by punkin View Post
I apologize if this is inappropriate. I don't mean to hijack the exchange but I may be learning something new here. I have installed a Merziere water pump with a 180 thermostat. Is this a bad thing given the t-stat will be closed until temp comes up? Is this bad for the pump?

No worries. We value everyone's help.


Check Steve post #2, what Jay Cason at Meziere and was told not to run a thermostat.

__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
  #13  
Old 01-25-2022, 09:04 PM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Location: Canada
Posts: 3,078
Default

Quote:
Originally Posted by misterp266 View Post
Following as I will be using a Meziere remote pump on my build.
I was thinking of adding an 8AN bypass hose from the crossover to the pump inlet side. I’m using a Moon front cover. May also add a couple of small holes in the thermostat. I have read that Meziere pumps don’t like PWM controls and also should not be deadheaded. And as Steve stated, water should be circulating all the time to prevent hot spots.

Ya, I left my water bypass in use so the water does move into timing cover to pump. I have the thermostat removed as of now and well see how it works when weather changes here.
Right now I have plumbed back of heads to water crossover. I already have somewhat of a restrictor in place. I have an adapter plate on the crossover that divide the front and back water flow.

Adapter http://www.precisionautomotivespecia...Manifolds.html
Attached Thumbnails
Click image for larger version

Name:	IMG-1246.jpg
Views:	257
Size:	60.8 KB
ID:	582687   Click image for larger version

Name:	IMG-1248.jpg
Views:	244
Size:	45.1 KB
ID:	582688  

__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.

Last edited by chuckies76ta; 01-25-2022 at 09:28 PM. Reason: add pic
  #14  
Old 01-25-2022, 09:10 PM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Location: Canada
Posts: 3,078
Default

Quote:
Originally Posted by AG View Post
I run a 160 F T-stat in my race car with a Meziere electric water pump and it works fine.

Thanks for the info. Are you still running the bypass?
I'm still wondering why Meziere rep would say not to run a thermostat. I understand that if you do remove thermostat that they want a restrictor plate in place to slow water volume down to the rad.

If a thermostat is installed and nothing else changed from stock setup, the electric pump is not dead headed. It does the same operation as a mechanical pump. Am I right or wrong? I understand that if the thermostat is removed, that a person can cool the engine down to basically temp outside if run long enough. What I'm alluding to is that with the thermostat installed, you'll only cool engine to thermostat setting. Say 160 deg. You won't cool engine down any further. If thermostat is removed you could cool engine down to like 120 deg. or possibly lower. I'm wondering if that is the only reason to remove the thermostat once an electric pump is installed?

__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.

Last edited by chuckies76ta; 01-25-2022 at 09:19 PM.
  #15  
Old 01-25-2022, 11:57 PM
Mike Davis's Avatar
Mike Davis Mike Davis is offline
Ultimate Warrior
 
Join Date: Jun 2000
Location: Athens Ga, or at a NMCA race
Posts: 1,994
Default

Mike Meziere buys CNC machines from us that he makes these pumps with, I have 2 of his pumps on different engines. He and I had a long discussion about this. He felt it was hard on the pump motor when the thermostat was closed. He felt there was no need to run a thermostat. I run a gutted Thermostat as a restrictor ring on my 66. Car runs about 180deg when I drive it on the road with a block filled to the bottom of the freeze plugs.

__________________
66 GTO Nostalgia Super Stock/Street Legal Car
421 CID, stock block, Wenzler Intake, 2- Carter 750 AFB's, 3.90 Gears, Full Factory Interior, Full Exhaust, Stock Suspension 3750LBS 9.77@136.99
Multiple NSCA/NMCA World Champion

66 GTO 389 3x2, 4 speed, 4.33 gear, Montero Red 33K original Miles
67 GTO 2dr Post, 428, Tri Power, 3.55 Gears
80 Trans Am Black SE Y84 W72 WS6
  #16  
Old 01-26-2022, 01:16 AM
R 70 Judge's Avatar
R 70 Judge R 70 Judge is offline
Ultimate Warrior
 
Join Date: Mar 2002
Location: San Diego, CA
Posts: 2,691
Default

I went from no thermostat to a 160* thermostat in my TA and it seemed to consistently run cooler on the street, but I also changed the radiator cap to a higher pressure unit at the same time so I honestly don’t know which helped. I hit 200*-205* on the street briefly before the change with no thermostat. Got up to 185* with the updated 160* stuff. I’m running a meziere pump as well. It’s funny this thread came up because I was just thinking about pulling water from the back of the heads like this first set-up posted to see if it would help.




__________________
James
1970 Trans Am

Spotts Built 484" IA2, Highports, EFI Northwind
Terminator X sequential EFI fabrication and suspension by
https://www.funkhouserracecars.com/
  #17  
Old 01-26-2022, 04:16 AM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Location: Canada
Posts: 3,078
Default

Quote:
Originally Posted by Mike Davis View Post
Mike Meziere buys CNC machines from us that he makes these pumps with, I have 2 of his pumps on different engines. He and I had a long discussion about this. He felt it was hard on the pump motor when the thermostat was closed. He felt there was no need to run a thermostat. I run a gutted Thermostat as a restrictor ring on my 66. Car runs about 180deg when I drive it on the road with a block filled to the bottom of the freeze plugs.

Thanks Mike. I also have taken a thermostat and gutted it for testing when car is back on the road. Thanks for posting.

__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
  #18  
Old 01-26-2022, 04:39 AM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Location: Canada
Posts: 3,078
Default

Quote:
Originally Posted by R 70 Judge View Post
I went from no thermostat to a 160* thermostat in my TA and it seemed to consistently run cooler on the street, but I also changed the radiator cap to a higher pressure unit at the same time so I honestly don’t know which helped. I hit 200*-205* on the street briefly before the change with no thermostat. Got up to 185* with the updated 160* stuff. I’m running a meziere pump as well. It’s funny this thread came up because I was just thinking about pulling water from the back of the heads like this first set-up posted to see if it would help.
Thanks for posting info James


I initially ran the hoses from back of the heads to the intake crossover and also run one to the return on the water pump bypassing the heater core. That was this past summer with a mechanical pump. We ran a 160* thermostat, and the hottest the engine got on the coolant gauge was 170* -175*. We still have the same radiator from other engine that was 600 hp. This combo is 789 hp and 700 torque. 505 cu in.

I just installed the electric water pump this winter and I also removed the return to the water pump that is for the heater core. I figured if no thermostat used that there is need to feed water pump return. I blocked this one off.
Again, I haven't tested any of this yet with new electric water pump. My only concern at this point is getting the engine up to temp with no thermostat installed. I like the way it ran before with mechanical pump. I went to a serpentine setup as we were having trouble throwing P/S belts. I figured at the time I would install electric water pump an would assist in coolant engine after a run.

I have the hoses setup like your first pic.

__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
  #19  
Old 01-26-2022, 08:51 AM
BDHABT's Avatar
BDHABT BDHABT is online now
Chief Ponti-yacker
 
Join Date: Jul 2004
Location: Plainville,CT
Posts: 620
Default

Ran a 55gpm Meizere water pump for ten years with a thermostat,never an issue.

__________________
`70 Firebird,Original Owner car

Ken French Built Chassis

Carlquist Competition Engines IA2 505
Competition CNC Ported Super Chiefs
CCE Ported Gustram
Twin Dominators from Shaker 455
963 HP


`09 Electra Glide Standard.

`03 F-350 7.3 6-speed 4x4 Crew Cab Dually.
The Following User Says Thank You to BDHABT For This Useful Post:
  #20  
Old 01-26-2022, 09:58 AM
AG's Avatar
AG AG is offline
Ultimate Warrior
 
Join Date: Feb 2000
Location: NH
Posts: 3,240
Default

Quote:
Originally Posted by chuckies76ta View Post
Thanks for the info. Are you still running the bypass?
I'm still wondering why Meziere rep would say not to run a thermostat. I understand that if you do remove thermostat that they want a restrictor plate in place to slow water volume down to the rad.

If a thermostat is installed and nothing else changed from stock setup, the electric pump is not dead headed. It does the same operation as a mechanical pump. Am I right or wrong? I understand that if the thermostat is removed, that a person can cool the engine down to basically temp outside if run long enough. What I'm alluding to is that with the thermostat installed, you'll only cool engine to thermostat setting. Say 160 deg. You won't cool engine down any further. If thermostat is removed you could cool engine down to like 120 deg. or possibly lower. I'm wondering if that is the only reason to remove the thermostat once an electric pump is installed?
I still run the by-pass and can quickly cool the engine down to below 160 F using the water pump and fan. I come back to the pits, cool it for 5-10 min and I'm off again.

__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule.
The Following User Says Thank You to AG For This Useful Post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:10 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017