FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Favorite stock pocket E head roller spring 1.8IH
So you guys have a favorite spring that will take .650-.660 lift? 220 ish seat Comps Hi Troque .406 lobe 1.6 shafts.
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
#2
|
||||
|
||||
Screamin Chief loved the HT 406 lobes.
|
#3
|
||||
|
||||
Skip are your heads the first design?
|
#4
|
||||
|
||||
Yep first design, maybe even first run as they were out for months when I wanted to buy a second set.
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
#5
|
||||
|
||||
These little guys will fit any od spring packet, 250psi on seat 650 psi open
|
#6
|
|||
|
|||
I'll bite......
What brand are those springs and their part number ? .
__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 ) Old information here: http://www.hotrod.com/articles/0712p...tiac-trans-am/ Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine) 5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension https://www.youtube.com/watch?v=qDoJnIP3HgE |
#7
|
||||
|
||||
How good is the spring life?
I just ordered a set of comp extreme 1244 springs recamended by Scott Brown. GT. |
#8
|
||||
|
||||
I also ordered a set of trick flow by pac racing dual valve springs
Part number 16944-16. There supose to last a good long time. GT. |
#9
|
||||
|
||||
IH is 1.8 I'm guessing a 1.500 pocket, I know Butler used to recommend the Comp 917s that are 1.550 and they felt tight so I found some Lunati Pro Mods that were 1.500 that are no longer made.
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
#10
|
||||
|
||||
What about PSI springs. https://www.psisprings.com/products/1500-series/
https://www.psisprings.com/products/1200-series/ |
#11
|
||||
|
||||
Here are some Howards that look close to SD's roller specs
https://www.howardscams.com/pro-allo...rds-cams-98643
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
Reply |
|
|