FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Quick cam suggestions ?
I've run in a fresh 462 and ran into a oil pan leak , valley pan leak and a light coating of milky substance on the inside of the valve covers.
Needles to say I removed the engine and am in the proces of taking it apart again. I've always been wary about the XE274H cam in the build ( negative posts ). The problems I'll address but , I've been searching thrue a lot of posts about a fitting cam and I only get more confused about the load of info to absorb. My goal was 500 hp So now that it's on the engine stand and I need to order parts anyway , any quick suggestions on the cam ? 462 , BRC pistons , eagle rods , eagle cast crank. KRE D-ports cleaned up and 2.11/1.66 valves , Harland Sharp 1.5 RR Q-jet modified according to Cliffs instructions , RPM intake. Everything port matched , Hedman 1 3/4 headers. TH400 / TCI converter stall 2000 , 3.31 : 1 gears. |
|
|