[Pontiac Fool]

Is there any new Lynn's RAV headed cars out there at the tracks? Just wondering why there's never any postings. If I had a set & running I'd be posting (bragging) about it. Im wanting a set but I never here of guy's running them. Lynn posted pics of a bunch of heads going out. So why are we not hearing anything?

[cgeise]

I think I hear snickering from under the bleachers-------------

[Pontiac Fool]

I was real excited to see these come out around 2ys ish ago & with no results from someone other than Lynn it's not good. I mean someone can come out with something & post all the good stuff about them is great but with no one else posting actual experiences is odd. How many sets are out there? 10, 20, 30 or more? Someone has to have actually ran one RIGHT??

[hurryinhoosier62]

As far as I know, Lynn's not even sold a set. He's still doing development work. You might what to contact him. He's a member.

[higgenslake]

sold 2 sets to TomS

[J.C.you]

Originally Posted by Pontiac Fool

Is there any new Lynn's RAV headed cars out there at the tracks? Just wondering why there's never any postings. If I had a set & running I'd be posting (bragging) about it. Im wanting a set but I never here of guy's running them. Lynn posted pics of a bunch of heads going out. So why are we not hearing anything?

I don't think there is alot of high end builds of any head, much less the v's at this time, because of the crummy economy. I certainly don't want to talk for Lynn, but his v head was not intended to be a all out race head. His v head is a nice compromise between the two. He does have a head porters version also for the do it yourselfer. If one wanted to build a budget set, ready available ebay pull out nascar tit. valves and hardware would easily adapt to these heads. You cannot say that for the other raised port offerings to my knowlege.

I am not in the habit of putting the plow before the horse, but I will go out on a limb and say the v head combo we are working on will be he highest hp n/a pontiac built to date.

[Scott Roberts]

Originally Posted by J.C.you

I don't think there is alot of high end builds of any head, much less the v's at this time, because of the crummy economy. I certainly don't want to talk for Lynn, but his v head was not intended to be a all out race head. His v head is a nice compromise between the two. He does have a head porters version also for the do it yourselfer. If one wanted to build a budget set, ready available ebay pull out nascar tit. valves and hardware would easily adapt to these heads. You cannot say that for the other raised port offerings to my knowlege.

I am not in the habit of putting the plow before the horse, but I will go out on a limb and say the v head combo we are working on will be he highest hp n/a pontiac built to date.

So you intend to make in 1300+hp range?

[R 70 Judge]

Originally Posted by higgenslake

sold 2 sets to TomS

Here's some info on them.

http://forums.maxperformanceinc.com/...hlight=ram+air

[Bluesugar]

so these are Not/Available heads?(for now)

[tom s]

One set!

[LiL Jack]

Originally Posted by Scott Roberts

So you intend to make in 1300+hp range?

Talk=cheap.

[hurryinhoosier62]

Well,it figures Tom would have them if anybody has them. Any progress on the engine,Tom?

[RAIV-Z]

I also have 1 set. Read the the tt535 efi build thread.

[Tom Vaught]

Read my post in your thread in the street section.

Tom Vaught

[tom s]

I gave up on the project and sold the heads,also the Alu RA V block.I have only one RA V engine left.Tom

[Brian Baker]

I have a set on order that are solid cast (no water jackets)...haven't picked them up yet, Lynn is waiting on me.

[J.C.you]

Originally Posted by Scott Roberts

So you intend to make in 1300+hp range?

no estimate, but uncle tony's resume speaks for itself on making power with a poncho.

[J.C.you]

Originally Posted by LiL Jack

Talk=cheap.

correction... eheads= cheap...that's another thread i believe.

[Scott Roberts]

Originally Posted by J.C.you

no estimate, but uncle tony's resume speaks for itself on making power with a poncho.

You already made an estimate by stating it would be the highest hp n/a motor to date.. that puts you at the 1300+ hp range. No doubt Tony is good. Best of luck to you.

[Jack Gifford]

Originally Posted by Brian Baker

I have a set on order that are solid cast...

Do tell...