| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
07-29-2004, 05:14 AM
|
|||
|
|||
I'm going to use stock valve covers, twist on/push on holes. Who makes a twist on Mopar breather? I'm looking to vent into the air cleaner on both sides.
|
|
#2
07-29-2004, 05:14 AM
|
|||
|
|||
|
I'm going to use stock valve covers, twist on/push on holes. Who makes a twist on Mopar breather? I'm looking to vent into the air cleaner on both sides.
|
|
#3
07-29-2004, 08:58 AM
|
||||
|
||||
|
Guy. I don't know of any twist on MOPAR style breathers. Go to a parts store and ask to look at thier master filter guide. There is usually an illustrated buyers guide in them. I used to work for NAPA and the breathers were in their filter line.
__________________
 ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far..  through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#4
07-29-2004, 11:47 AM
|
|||
|
|||
|
Thanks 60MAN. I thought somebuddy'S been there done that could send me in right way...but I'll get there. Way fast '60 60! How did you get thing going that fast in 1/8?
|
|
#5
07-29-2004, 06:36 PM
|
|||
|
|||
|
let me know if you find them Guy... I am lookimg to do the same thing....thanks
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
