[Nyairguard]

this may help someone out here, bought a paint kit online stated a perfect match?? who knows Im building a driver,, may have been mentioned before on the site before but this is what was sent

stencil kit
seymour
2 cans metallic nickle 98-17
1 can cast iron gray 11-48

[grivera]

Thanks- where did you buy the kit?

[Nyairguard]

fleabay inline-tube

[Red80TA]

Inline-Tube have some decent products. But you have to do your own research, their own listings and what models they fit and why are mythical.

[grivera]

Originally Posted by Nyairguard

fleabay inline-tube

Thanks - keep us posted with pics

[Half-Inch Stud]

Paint deal in rally iis should do well if you pick a paint that is hard to hirt with a screwdriver strike; like non-sanding gray primer followed by machinery gray Paint. I think the paint melts into the primer for a strong surface.

Had great success with powdercraft doing my rally iis when they were a startup. Now i wonder if they exist, or do rims anymore.

Key trait for rally ii success: SOMEHOW prep/fill the center plate to rim gap, so that rust doesn't start and creep out. Inside of rim is a weld but outside is a tnagential gap that harbors moisture for rust.

[Nyairguard]

We’ll finished the 60 bucks make over of my wheels ,, I like the looks of them






Sent from my iPhone using Tapatalk

[Nyairguard]

Sent from my iPhone using Tapatalk

[grivera]

They look great

[RocktimusPryme]

I did a similar deal a while back. My take was that the paint was an excellent match, but the stencil kit was trash. The triangle shapes flat out didn’t match the wheels.

[TCSGTO]

Originally Posted by RocktimusPryme

I did a similar deal a while back. My take was that the paint was an excellent match, but the stencil kit was trash. The triangle shapes flat out didn’t match the wheels.

Mine needed a little touch-up on the masking also for a good outcome. Factory painted wheels were far from perfect though.

[grivera]

OP - how is the paint holding up?

[Tempest]

looks good Nyairguard

I have never liked the stencils.

Here are mine, sandblasted and epoxy primed (white) ,
then sprayed silver
the masked and sprayed grey
than a satin clear coat


.... and add some custom centers

[Nyairguard]

Love those centers , dealing with weather stripping doors and t-top surrounds.. this is my first 2nd gen and out of the eight cars I restored this weather stripping kicking my arse tried metro and Fairchild and both fit poorly


Sent from my iPhone using Tapatalk

[grivera]

Tempest - that center cap is awesome!

Wheels look great - What brand and paint code did you use?

[Tempest]

just used Rustoleum ?? I think. the silver is easy, but I find that the grey can't be too dark, or they don't look right (to me) It was just an off the shelf automotive paint, not sure of name/code? sorry.

the centers were made on a 3D printer by a friend of mine. (and I put many coats of clear on)

I am hoping they look good on my 58 Pontiac Wagon (work in progress)