| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
07-07-2010, 08:34 AM
|
|||
|
|||
70 conv door/qtr glass alignment
as i get ready to install the interior panels, i thought i'd check the glass alignment when rolled up. the drivers door glass comes to a stop about 1/2" below top of rear qtr glass, and the top edge is tilted in approx 3/4" beyond the qtr glass. on the passenger side, both door and qtr glass seem to be lilted towards the interior about the same 3/4" making it difficult to raise the rear qtr window, and they both (door and qtr) seem to stop low of the roof weatherstripping. anyone have any adjusting tips. i did a quick search for 'glass alignment' didn't get too far. thanks in advance, jz
|
|
#2
07-07-2010, 05:22 PM
|
||||
|
||||
|
I had a lot of trouble with my 72. I don't think there are any easy ways, but do it with the top up. I didn't the first time and it made it really bad.
__________________
1964 GTO Auto 1970 GTO Ram Air III 4-speed 1972 Lemans Convert with endura option, 455, 4-speed |
|
#3
07-07-2010, 08:46 PM
|
|||
|
|||
|
I had trouble adusting my 70 Convertible glass, My right side is great, but the left quarter just needs to be higher by maybe a quarter inch. But it's at the limit. I was thinking that the convertible top needed alignment. When I checked the top using the Fisher manual everything was fine.
Dave 
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
