Tri-power & power brakes
Hi, just switched to power disk brakes from manual disk, one problem im having is what tool you guys are using to adjust your idle screws with this set up...........i have one of those flexable carb adjusting tools, i can get the idle screw on the pass side, but no way can i get that on the drivers side with that fitting for the power brakes booser in the way. I can get a super slim screw driver on it, but that is really hard to do...........The fitting i have on there now is from Mike Wasson, in fact all the carbs were redone by mike............so far im having major issues as far as idleing is concerned, it jumps anywhere from 500 rpm to 2000 by itself, havent been able to get hold of Mike, so i thought i would ask here .
Rich
|