FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Pre -heat head
Recently cracked a head while filling cross over of a 6x head ,the other head didn't crack,pre heated both heads.maybe the one that cracked wasn't heated high enough,which brings me to my question, What should the pre- heat temp be prior to adding the moulting aluminum?
__________________
76 T/A 455, cnc chamber E heads,OF hyd roller ,yella terra shaft rockers 11.47 119 |
#2
|
||||
|
||||
250 should be plenty good, but you need to cool it down slow over the course of 6 hours if you don't not want to have to do some re maching!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#3
|
||||
|
||||
Pre-heat to 450-f was my goal when doing this. Let it sit in the oven or gas grill for at least an hour to ensure heat has soaked evenly through entire casting. Hotter head means slower cooling of the aluminum which ensures more consistant grain structure. Also helps expel any moisture that may be present in the porous iron.
|
#4
|
|||
|
|||
Thanks GRX,oven would work better for me.That or will try Contronics 940 ht ceramic
__________________
76 T/A 455, cnc chamber E heads,OF hyd roller ,yella terra shaft rockers 11.47 119 |
Reply |
|
|