FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
rear sway bar bushing question
My 76 T/A has the original 13/16" rear sway bar. However the actual diameter is .806-.809" depending where it's measured. The area where the bushing rides is slightly warn smooth and measures .790" What poly bushings do I get? 3/4" and open them up or are the 13/16" bushings okay.
Thx, Larry |
#2
|
|||
|
|||
I would use the 13/16" bushings. You may consider adding a bit more grease to help take up the small amount of tolerance that has built up over the years.
__________________
-Jason 1969 Pontiac Firebird |
#3
|
||||
|
||||
Which bushings? there are 3 sets.
|
#4
|
|||
|
|||
spring perch mount is .790. Hanger mount at clamp is actually .783-.790 ( somewhat egg shaped). The third is pretty good
|
#5
|
||||
|
||||
If rubber I would go 3/4" and use lots of silicone lube.
|
Reply |
|
|