#1  
Old 10-16-2021, 04:21 PM
Peckels Peckels is offline
Member
 
Join Date: Jan 2006
Posts: 52
Default victor Edelbrock heads

I thought these heads were discontinued like 5 years ago . Now BES is selling them . maybe an old ad i guess

//www.besracing.com/cylinder-head-and-intake-packages/cylinder-heads/pontiac/bes-edelbrock-victor

  #2  
Old 10-16-2021, 06:33 PM
Peckels Peckels is offline
Member
 
Join Date: Jan 2006
Posts: 52
Default

https://www.besracing.com/cylinder-h...elbrock-victor

  #3  
Old 10-16-2021, 06:41 PM
Steve C. Steve C. is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Liberty Hill, Tx. (Austin)
Posts: 10,385
Default

CNC Ported by BES, 460cfm

https://butlerperformance.com/i-3164...tegory:1234765

.

__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 )
Old information here:
http://www.hotrod.com/articles/0712p...tiac-trans-am/

Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine)
5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension
https://www.youtube.com/watch?v=qDoJnIP3HgE
  #4  
Old 10-16-2021, 07:19 PM
Scott Stoneburg's Avatar
Scott Stoneburg Scott Stoneburg is offline
Ultimate Warrior
 
Join Date: Sep 2007
Posts: 2,179
Default

Its possible that BES or Butler purchased them while they were still available from Edelbrock and have not sold out of stock yet. But I understand that Edelbrock stopped making these a while ago.

  #5  
Old 10-16-2021, 07:52 PM
ponjohn's Avatar
ponjohn ponjohn is offline
Ultimate Warrior
 
Join Date: Mar 2002
Location: Connecticut
Posts: 9,530
Default

Geez 411 cfm at 600 lift.

  #6  
Old 10-16-2021, 10:52 PM
Steve C. Steve C. is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Liberty Hill, Tx. (Austin)
Posts: 10,385
Default

Off set rockers on the intake ?


.

__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 )
Old information here:
http://www.hotrod.com/articles/0712p...tiac-trans-am/

Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine)
5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension
https://www.youtube.com/watch?v=qDoJnIP3HgE
  #7  
Old 10-17-2021, 01:39 AM
opeliac opeliac is offline
Senior Chief
 
Join Date: Mar 2010
Posts: 457
Default

BES and Butler are the ones that the heads are being produced for, as a signature head.

  #8  
Old 10-17-2021, 11:34 AM
slowbird's Avatar
slowbird slowbird is offline
Ultimate Warrior
 
Join Date: Jan 2001
Location: Montgomery, IL
Posts: 10,638
Default

Wish they have a starting point price

  #9  
Old 10-17-2021, 11:37 AM
opeliac opeliac is offline
Senior Chief
 
Join Date: Mar 2010
Posts: 457
Default

Quote:
Originally Posted by slowbird View Post
Wish they have a starting point price
I'm with ya on that one...David Butler was telling me about this deal a few weeks ago...Should be a good head for sure...I just got my Eheads from AP, and my Ti/In valves, or else i'd go that route...

  #10  
Old 10-17-2021, 12:30 PM
"QUICK-SILVER" "QUICK-SILVER" is offline
Ultimate Warrior
 
Join Date: Feb 2008
Location: LaFayette Georgia
Posts: 5,512
Default

Quote:
Originally Posted by slowbird View Post
Wish they have a starting point price
Jegs has raw price.. $2,300 plus change for a pair

https://www.jegs.com/i/Edelbrock/350/77849/10002/-1

Clay

  #11  
Old 10-17-2021, 12:33 PM
Stan Weiss's Avatar
Stan Weiss Stan Weiss is offline
Ultimate Warrior
 
Join Date: Jul 2013
Location: Philadelphia, PA
Posts: 5,000
Default

The number I have from sometime ago for Pro Ports by John Marcell. Only have Intake numbers. Note it has a smaller 2.30" valve.

.300 243
.400 318
.500 380
.600 434
.650 447
.700 460
.800 466
.900 460

Stan

__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm
  #12  
Old 10-17-2021, 12:57 PM
opeliac opeliac is offline
Senior Chief
 
Join Date: Mar 2010
Posts: 457
Default

Quote:
Originally Posted by "QUICK-SILVER" View Post
Jegs has raw price.. $2,300 plus change for a pair

https://www.jegs.com/i/Edelbrock/350/77849/10002/-1

Clay
Thats probably the old deal...The new ones may be only available through Butler or BES

  #13  
Old 10-17-2021, 06:39 PM
"QUICK-SILVER" "QUICK-SILVER" is offline
Ultimate Warrior
 
Join Date: Feb 2008
Location: LaFayette Georgia
Posts: 5,512
Default

Quote:
Originally Posted by opeliac View Post
Thats probably the old deal...The new ones may be only available through Butler or BES
From Jegs

"Estimated to ship direct from manufacturer on 10/27/21 , pending manufacturer availability."

Clay

  #14  
Old 10-17-2021, 08:51 PM
opeliac opeliac is offline
Senior Chief
 
Join Date: Mar 2010
Posts: 457
Default

Quote:
Originally Posted by "QUICK-SILVER" View Post
From Jegs

"Estimated to ship direct from manufacturer on 10/27/21 , pending manufacturer availability."

Clay
Jegs, and Summit, have always said they were available, even when they werent...

BUT...The new ones very well may be able to be bought from them...I havent heard for sure.

  #15  
Old 10-27-2021, 07:03 AM
Darren 639's Avatar
Darren 639 Darren 639 is offline
Senior Member
 
Join Date: Feb 2012
Posts: 220
Default

Sorry,Maybe little off topic. I’m sure if I do enough research I could see the difference in the E heads. I seem to think there may be three or four generations in at this point ? Can anybody educate me on the differences between the three Please. I know one was to help oil return the pan I don’t know the rest of the differences is there a fault in any of the designs that I should not use any longer? I do have an early set of Butler 370 wide ports. not sure if I should retire them? Motor is apart for fresh in up. But look good.

  #16  
Old 10-27-2021, 10:40 AM
GTO JONES's Avatar
GTO JONES GTO JONES is offline
Senior Chief
 
Join Date: Aug 2005
Location: PRESCOTT VALLEY, ARIZONA
Posts: 402
Default

How available are the pro port E heads and is anybody running them, flow numbers look good. I see BES and Butler show them.

  #17  
Old 10-27-2021, 03:49 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,294
Default

I believe that Tony B and David Butler have the only ability to sell the heads at the current time.
I understand they have some castings and IF you have the $$$$$, Tony will finish them to either 440 cfm or 460 cfm.

I talked to David B about this head a week ago.

Tom V.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
  #18  
Old 10-27-2021, 04:33 PM
JD's Avatar
JD JD is offline
Senior Chief
 
Join Date: Aug 2000
Location: Castro Valley CA USA
Posts: 259
Default

BES does have a batch of 11 degree heads for the add posted above. You can call BES and talk to Preston to get the exact price but I think they will be around $9000 complete without rockers. I was quoted $6800 if I supplied the cores.

__________________
Jim

71 Firebird, best 1/8th mile time of 5.02 at 142 at altitude in Vegas
  #19  
Old 10-27-2021, 08:01 PM
opeliac opeliac is offline
Senior Chief
 
Join Date: Mar 2010
Posts: 457
Default

Quote:
Originally Posted by JD View Post
BES does have a batch of 11 degree heads for the add posted above. You can call BES and talk to Preston to get the exact price but I think they will be around $9000 complete without rockers. I was quoted $6800 if I supplied the cores.
My ported e heads, with titanium and incolnel valves, with good parts are less than 5000.00 ported and ready to bolt on. 9000.00 doesn’t make a lot of sense to me. Considering the cores are close to the same price, port work should be close, and all of the parts are the same. Where does the extra 4000.00 go?

  #20  
Old 10-27-2021, 08:23 PM
johnta1's Avatar
johnta1 johnta1 is offline
Ultimate Warrior
 
Join Date: Feb 2001
Location: now sunny Florida!
Posts: 21,237
Default

What does your heads flows?



__________________
John Wallace - johnta1
Pontiac Power RULES !!!
www.wallaceracing.com

Winner of Top Class at Pontiac Nationals, 2004 Cordova
Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats

KRE's MR-1 - 1st 5 second Pontiac block ever!


"Every man has a right to his own opinion, but no man has a right to be wrong in his facts."

"People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:04 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017