FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
TRW CAMSHAFT
Does anyone possibly have an old TRW engine catalog, I have a camshaft part #tp190 and would like to get the specs. on it, I believe it would fit 60's and early 70's pontiac 8 cyl. of course. thanks
|
#2
|
|||
|
|||
Could it be TP130? [ Pontiac cam ]. My 1977 TRW catalogue stops at TP167.
TP130: 284/284 deg adv; 8.75/34.75 deg int; 44.75/1.25deg exh; 68 deg overlap; 0.291" lobe lift int & exh. |
#3
|
||||
|
||||
I think I still do ,but I will have to check tonight.
|
#4
|
|||
|
|||
trw cam
geoff, I am going off my reciept for the mid 80' s It looks like tp190, It is a 65 389
|
#5
|
||||
|
||||
Hi, the TP190s specs are these.
intake lift w/1.5 rockers=.420" exh lift=.443" Duration at .050" intake=204 exh=214 Overlap at .006" lift=63 lobe centers intake=107 exh=117 Looks like a smidge hotter 389 4bbl cam. I would use different springs so I could run 1.65 rockers and get .462" and .487" lift along with the 3 degrees more duration the rockers will add. |
#6
|
|||
|
|||
SPECS
Thanks alot for the info. I knew I used a little hotter cam than stock, I've, been reading Jim Hands max performance book and it got my interest up, so I was curious on the specs. thanks again.
|
Reply |
|
|