FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1967 Pontiac Firebird
Greetings! I just picked up a 67 Firebird 400. I plan to keep the stock drive train during my restoration process. I do want to convert to roller lifters. I need front fenders and have been looking for reliable sources. I am a Ford guy so I got lots to learn.
__________________
1967 Pontiac Fire Bird 1965 Fastback Mustang 1969 C10 Shortbed 1951 F-1 Ford Truck |
#2
|
||||
|
||||
The host of this site( Ames) has your needed body parts.
Are you speaking of a hydro roller cam, or a solid roller? PS, if that’s the 400 block in your picture that you will rebuild I would really try to keep metal of off of it that could but a deep nick or scratch into the deck surfaces . A 15 buck cost for a scrap section of 1/4” plywood to plop over it could save you hundreds in the cost of decking machine work!
__________________
I do stuff for reasons. Last edited by 25stevem; 12-31-2022 at 07:31 PM. |
#3
|
|||
|
|||
Cool & welcome. With any luck, you were a Ford guy!
__________________
"At no time did we exceed 175 mph.” Dan Gurney's truthful response to his and Brock Yate's winning of the first ever Cannonball Baker Sea-to-Shining Sea... Still have my 1st Firebird 7th Firebird 57 Starchief |
#4
|
||||
|
||||
Lol, I was very much thinking the same thing, once he gets the FB going, especially if his 65 stang does not have at least a 390 cid FE motor stuffed in it.
__________________
I do stuff for reasons. |
Reply |
|
|