FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#41
|
|||
|
|||
Respectable numbers Tory and a great idea running it on a dyno …..is that a 068 cam?
|
#42
|
||||
|
||||
Yup, I had an NOS cam so used it. The builder had to bore it 30 thousandths, put in a pertronix ignition and spent time in the valve job, other than that is stock.
|
#43
|
||||
|
||||
Got the engine painted and installed, lot of odds and ends to clean up but it should be drivable soon!
|
#44
|
|||
|
|||
your making good progress….. can't help but notice the heavy schutz around the heater core box very typical on Oshawa built cars.
|
#45
|
||||
|
||||
70 judge slow resto
Can anyone tell me where all the TCS vacuum lines go? By the manual it appears that the front port( below the wire terminals) goes to the back side of the carb. My problem is that I have 2 ports in the back(firewall) side. I know that 1 goes to the distributor, just not sure where the other is supposed to go. Any help would be appreciated
|
#46
|
|||
|
|||
Quote:
|
#47
|
||||
|
||||
Got it all figured out and got it running! Still have lots to do but at least I can drive it now.
|
#48
|
||||
|
||||
A few more pics...
|
#49
|
||||
|
||||
|
#50
|
|||
|
|||
Your car really turned out nice and you didn’t have it stuck in paint jail or drain your bank account before you could get out and enjoy it. Dig the pic with the kid checking out the twin ‘patches’.
|
Reply |
|
|