| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
03-18-2006, 07:43 PM
|
||||
|
||||
Pypes question concerning manifold to downpipes connection gasket
Got my exhaust system by pypes. I cant remember if there is a gasket or donut gasket that goes between the downpipe and the exhaust manifold or does it just bolt up bare and tighten up??
Thanks
__________________
All the world is birthday cake, so take a piece but not too much. George Harrison |
|
#2
03-19-2006, 03:07 AM
|
||||
|
||||
|
Not sure if all manifolds are the same, but the long-branch don't use any gaskets to the downpipes.
|
|
#3
03-19-2006, 09:04 AM
|
||||
|
||||
|
There is a flare on the downpipe that just bolts to a factory manifold. No donut gasket.
__________________
 frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core. 
|
|
#4
03-19-2006, 10:13 AM
|
||||
|
||||
|
Thats what I thought but wasnt sure, didnt want to bolt it up only to have a huge leak,
Thanks guys
__________________
All the world is birthday cake, so take a piece but not too much. George Harrison |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
