FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
RAM AIR V compression ??
lost again poo poo
factory block/crank/rods/heads all 400 diamond 4.155 comp height 1.720 eff.volume +13.5 ccdome int pocket 0.140 exh pocket 0.175 deck and milling head unknown ? gasket thickness to get about 11.1 ? john ricondas V thank you folks |
#2
|
||||
|
||||
Here's the only answer that anyone can give you without YOU providing the rest of the needed details.
With a piston at TDC you need a total of 83.3 CCs to achieve a 11 to 1 compression ratio. The other thing that's certain is that 13.5 cc dome needs to go since I don't think you be wanting to grind / machine that 13.5 CCs into the chamber even if it could be done.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
The Following User Says Thank You to steve25 For This Useful Post: | ||
#3
|
|||
|
|||
Might give Rick Johnson in Crete IL a call and see if he remembers what the CR was.Custom Automotive.Make sure you have some time to give up when you call!Tom
|
The Following User Says Thank You to tom s For This Useful Post: | ||
#4
|
|||
|
|||
thanks STEVE !!!
thank you steve your darn smarter than me
Quote:
|
#5
|
|||
|
|||
thank ya TOM
fishin must be good for memory
now i remember to have AMPLE phone time/that is a great man that helps us |
Reply |
Thread Tools | |
Display Modes | |
|
|