| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-27-2021, 08:05 PM
|
||||
|
||||
Prefilter for EFI
The Sniper master kit comes with two filters, a 100 micron for before the pump and a 10 micron for the head unit. I am not using the inline pump because I only bought the basic kit. I have an intank pump from Tanks so I don’t need the 100 micron filter do I? Woukd rather not plumb two filters if I don’t have too.
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
|
#2
09-27-2021, 08:17 PM
|
||||
|
||||
|
No, you don't need both. The in tank pump should have a filter on it. Just use your 10 micron.
__________________
'65 Tempest 467 3650# 11.30@120.31 |
|
#3
09-27-2021, 08:27 PM
|
||||
|
||||
|
Agree, and the intake filtered EFI fuel Pump, even with the smaller 255 Liter Per Hour fuel flow capability should work fine for your project.
A lot of the modern EFI pumps from Tanks, Inc are able to use the 15% Ethanol/ Gasoline Fuel sold at the pumps and live for years. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
#4
09-28-2021, 02:53 AM
|
||||
|
||||
|
Thanks guys
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
