[1979birds]

Hi does anybody have I think it is called an Accelerator Linkage Rod for sale.
It is the small one attached to the carb.

[1979birds]

Is there anybody that knows were I can get this part?

[chuckolot]

I used a universal kit from summit, cut to fit. Works great if your not just looking for the original linkage

[beemergary]

Get some 1/4 rod and bend to fit. Thread the ends and go to a REAL parts store and get some ball and socket ends. On aluminum rod you gotta sand down the dia. a little before threading.

[beemergary]

My 63 coupe.

[tom s]

Gary,I think he is looking for the 4 cyc 1 bbl linkage,not the rod from the throttle linkage on the firewall.Little short one.Tom

[rod cole]

I have a whole 4 cylinder 62 tempest. I will need a very good discription to go looking at it. if it is there tell me what it is worth. And I will send it. Rod

[rod cole]

By the pic it has a ball socket with a arm attached to it?

[Doug]

I think the "short" one has ball-and-socket ends on both ends of it. Do what Gary says. I don't know if the rod has fine or coarse threads but if "looks" isn't important, use all-thread rod.

[1979birds]

Thanks guys. I am looking for the 4 cyc 1 bbl linkage. For some reason when I got the car it was missing. Rod if you have one let me know if not I will try to rig something up.

[beemergary]

Originally Posted by tom s

Gary,I think he is looking for the 4 cyc 1 bbl linkage,not the rod from the throttle linkage on the firewall.Little short one.Tom

My bad shoulda looked at pic.

[Doug]

I just remembered that my old Craftsman mower had a "short" rod with ball-and-socket ends on the transmission shifter linkage on the axle housing. You may be able to find something at a mower repair shop.

[rod cole]

I have it but the other end looks swaged to the other piece so would need to remove the whole thing. Yes? Rod

[1979birds]

Yes if you get it of I will gladly buy it from you.

[rod cole]

Is this all you need? pm me you're adress

[TempestFugit]

That looks like it.