FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1963 421 dipstick length
Hi All. I just recently picked up a 1963 421, it's in a black 63 Cat with Ventura buckets and a 4 speed. Runs OK but has an aftermarket dipstick that does not reach the oil after I changed the oil and put in 6 quarts with filter.
Can anyone tell me how long the dipstick should be on a 63 421, with and without A/C? (Not sure how this 421 was originally equipped.) Looking for the length from tip to edge of bell that slides over tube. Thanks, Chris |
#2
|
||||
|
||||
Chris, does the dipstick tube attach to the valve cover screw?
I am getting ready for a trip but before I leave I'll share '63 421 non-A/C length if possible. |
#3
|
|||
|
|||
Hi Matt. Yes, the tube bolts to the valve cover.
thanks, Chris |
#4
|
||||
|
||||
I'll post dimensions today...
|
#5
|
||||
|
||||
63 421 HO dipstick and tube
The ruler says it all...
|
#6
|
||||
|
||||
I'll chk the length on mine. If i recall there was a SB in 63 for the HOs replacing the dipstick for one that adds a addl qt of oil.
|
#7
|
|||
|
|||
Thanks guys. I'll try to cut down a later model A/C dipstick and make my own marks on it.
|
#8
|
||||
|
||||
WHOA! Do share this one, ho421!
|
#9
|
||||
|
||||
Here it is... hope its readable..
|
#10
|
||||
|
||||
And confirming oil level indicator with matt's photo.
|
#11
|
|||
|
|||
1963 P/8 421 & H.O. 5 qt. reading........................................... .9772949
|
Reply |
|
|