| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
12-06-2003, 08:27 PM
|
|||
|
|||
I have a 1970 posi out of a catalina and am thinking of putting it into my 66 bonneville. Is this a bolt in or are there changes that need to be made to make it work. Thanks!
The light at the end of your tunnel is just a freight train coming your way - Metallica
__________________
The light at the end of your tunnel is just a freight train coming your way - Metallica |
|
#2
12-06-2003, 08:27 PM
|
|||
|
|||
|
I have a 1970 posi out of a catalina and am thinking of putting it into my 66 bonneville. Is this a bolt in or are there changes that need to be made to make it work. Thanks!
The light at the end of your tunnel is just a freight train coming your way - Metallica
__________________
The light at the end of your tunnel is just a freight train coming your way - Metallica |
|
#3
12-06-2003, 10:28 PM
|
|||
|
|||
|
The differential case will fit your carrier but may not fit your ring and pinion ratio.
|
|
#4
12-06-2003, 11:50 PM
|
||||
|
||||
|
I looked at some of my manuals and the Motors manual say's that you might have a C clip rear from 69-76. My Chiltons manual says that the rears are the same from 65-70. My advise to you would be to pull both and set them side by side and compare.
__________________
RDRR Custom Fabrications ....A fictitious company doing fictitious work.... |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
