| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-10-2006, 09:50 PM
|
|||
|
|||
# 11 heads good for anything?
I won an auction on ebay last week,$31.00 for a complete 1970 350 YU engine with extras. The heads were gone thru about 20 or more years ago-new valves,new guides,new seals,new rocker arms,new push rods. Crank was turned,block was hot tanked and cylinders honed.Also got a bell housing and flywheel that has already been surfaced,and a new pressure oplate and throw out bearing,but haven't located the clutch disc yet. Just wondering if these heads were good for anything else?
http://cgi.ebay.com/ebaymotors/ws/eB...BSAA%3AUS%3A11 All this for $31.00 and a tank of gas! |
|
#2
09-10-2006, 10:17 PM
|
||||
|
||||
|
Wanting to know the same thing. I looked at an identical engine yesterday. Fresh, never fired. Guy wanted $100 for it but I just didn't have a use for a 350.
|
|
#3
09-10-2006, 11:39 PM
|
||||
|
||||
|
Small valve low compression heads...
__________________
68 Firebird Are you running with the wind or breaking it? |
|
#4
09-11-2006, 05:43 AM
|
||||
|
||||
|
Sleeper heads.
Correctly modified as good as any 1968-70 D-port R.A./H.O. heads. |
|
#5
09-11-2006, 11:13 AM
|
|||
|
|||
|
I run a stock,as in original 60k,on my 400 driver.It runs great,runs outta steam early but for a street car fine.With no tuning went low 14,high 13 should be no problem.
Another thing is they are great cores.If you are building a set,you can build them the way you want,porter has plenty of metal to work with,etc etc.
__________________
"resurfacing Pa highways 2 long black strips at a time" 78 Olds Cutlass Drag car PONTIAC powered with 440 (destroked 455), th400, 12bolt with spool 4.10z Best to date 10.00@130.92 mph at 3250# 79 Grand Prix, will be new home for the 440 Goal 9.75z@135mph at 2900# 83 Malibu Wagon UUV Crate 350, Custom T5, 8.5 with Auburn posi 3.73z Making it the Ultimate Utility Vehicle Go, tow and show (not so much show, yet) |
|
#6
09-11-2006, 01:11 PM
|
|||
|
|||
|
#11 head is an excellent canidate for port work etc. . Also excellent streetable compression on a 400 . Around 82cc if I remember.
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
