FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
12 Bolt axles, what are they worth??
I am going to occationally take my 67 gto for trip down the 1320, i have the stock axles in my 12 bolt chevy unit with c clip elliminator set up, before i get the car out i am thinking about switching to better axles, so to help with expences, how much are stock axles worth?? What axle do you think is the best set-up??
|
#2
|
||||
|
||||
MY 12.0 ET was using stock USED 12-bolt axles with C-Clips. A risky venture each run, Butt I used...
Half-Inch Studs.
__________________
12.24/111.6MPH/1.76 60'/28"/3.54:1/SP-TH400/469 R96A/236-244-112LC/1050&TorkerI//3850Lbs//15MPG/89oct Sold 2003: 12.00/112MPH/1.61 60'/26"x3.31:1/10"/469 #48/245-255-110LSA/Q-Jet-Torker/3650Lbs//18MPG 94oct Sold 1994: 11.00/123MPH/1.50 60'/29.5"x4.10:1/10"/469 #48/245-255-110LSA/Dual600s-Wenzler/3250Lbs//94oct |
#3
|
|||
|
|||
Resale value of stock axles? Good luck. All the ones I've seen have visible wear in the area the bearing rides on; might as well say that they're scrap.
Aftermarket axles are on the order of $220 and up; BEWARE of aftermarket axles that have too much distance between the C-clip groove and the end of the axle shaft. The ones I bought are going to have to be cut down in order to slide the pin back in. PITA. |
Reply |
|
|