[Z Code 400]

How about a dual-plane Tomahawk with TWO bosses for the throttle bracket????

[GoOrdnance]

An unobtrusive bolt-on locking bracket for the '65 GTO front seats that would lock the seat backs in place. This would allow the use of an upper body restraint system without having to rip out the headliner, weld parts in, and repaint the roof. The thought of me falling forward and crashing into into my steering wheel in a front collision is not pleasant (major cause of auto fatalities prior to shoulder belts). The '67 locking back seats look wrong in the '65, as do modern seats.

[GoOrdnance]

The stick-on applique for the '65 GTO AC climate controls - either in the stock black in the correct texture or in machine pattern. It should have the shiney back like the original to reflect the light up to the words.

[Ken Robinson]

I would like the speaker shelf from the back seat to the trink of a 1966 lamansall the old ones are about gone
ken roninson

[Goathead]

'65 GTO Automatic Consoles...

[pontiacpetey]

How about the front air baffle or dam for 70-72 a body with A/C part #9790969, they are not being made by anyone,

[Tim66]

1966 GTO tail lights buckets

[wbob69]

1/4" carb base gasket for 1967 intake

[wbob69]

Ram Air III hood decals in black

[Leojmcca]

How about a 1967 firebird deluxe interior black steering wheel

[U47]

I would really like to see some manufacturer (Edelbrock, All Pontiac,Butler,IA, Kauffman, ect.) to step up and make some overhead cam heads/ front engine covers / valve covers ect. like the one's that Mac Mckeller has on his 63 G/P for our traditional Pontiac blocks.

Don

[mikeb]

Sheet metal for 2nd gen firebirds

Package tray for TATA's

Shaker bases - used ones are going for ridiculous money now

[goatman65]

Hurst shifter 'T' handle in WHITE.I see black is now available.I think white is supposed to be avail.in Feb.Just wondering if that is still going to happen.

[454sixty8lemans]

I am looking for a front bumper for my 68 lemans hopefully local I am out of stockton ca.

[70FormulaRAIII]

1970 Firebird Sandalwood Carpet to include the piece for the door panel with deluxe interior

Yea, Yea, I know...but I'm talking about the correct shade of Sandalwood

[64697404GTO]

White door panels, rear quarter panels and the rear side panels for the 1974 gto

[70&71 TRANSAM OWNER]

Any closer to rear bumpers fo the 70 -73 F Bodey ???

[Nickv]

71-72 GTO lower fender panels with the holes already there for the fender vents!

65-67 GP window trim would be nice also. Both front and rear.

[70&71 TRANSAM OWNER]

How about blowing the dust off all the dies and eng castings and start building all the GTOs and TransAMs again from 1967 to 1970

[428RA4]

I would like to see the 1967 to 1968 Pontiac Firebird front grille emblem brackets redone. The emblem is done, but in order to do the install you need the two C type clip brackets for the emblem to be held onto the grille.