FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#81
|
||||
|
||||
Quote:
Interesting. The roller will "hit" harder by looking at the 200 numbers. |
#82
|
|||
|
|||
Upgrade the valve springs
.
__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 ) Old information here: http://www.hotrod.com/articles/0712p...tiac-trans-am/ Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine) 5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension https://www.youtube.com/watch?v=qDoJnIP3HgE |
#83
|
||||
|
||||
Quote:
Hyd roller cams, my brother went through kind of same deal many have, he bought his from Butler, when it wipe out, Butler made good on it but not with out allot of stress. Hopefully the new set up will be ok. But still he’s afraid to drive it..LOL Hey you never know, it’s hard to say is it the venders fualt should they check every cam before it goes out the door?
__________________
|
#84
|
|||
|
|||
60919 Flat Cam?
GTO is running really rough after the engine blew out freeze plugs. Had those fixed and just getting it running again. Took passenger side valve cover off and two rocker arms were sideways.
#4 Intake push rod is bent so bad it won't come out....I got the #4 exhaust push rod out (well about 3/5ths of it out with a magnet. It may be LS time. Super frustrated, looking forward to getting the intake off to see what else I see. |
Reply |
|
|