FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#41
|
||||
|
||||
This shot shows the drop offs in place and the inner guard repairs, as well as the tacked in outer wheelhouse patch. I found this all very fidly, as its difficult to be sure everything is going back in exactly the correct place, as there are several peices that all come together here.
http://i1294.photobucket.com/albums/...ps1oopbjsb.jpg Last edited by Gtozy; 07-13-2014 at 02:28 AM. Reason: typo |
#42
|
||||
|
||||
pressure is on now, time to hit the 1/4. fairly pleased with the results. with a bit more dolly work, and some filler it will be fine (thats what im telling myself anyway)
This took so long to fit up, but its porbaby the best fit i have done. Have learnt to take several cuts before getting to the last one, as things move around a little as the fit gets better. Thats it for now, hope you enjoy the pics http://i1294.photobucket.com/albums/...psacrphmoe.jpg |
#43
|
||||
|
||||
So a lot has happened since my last. Tho, now battling to get pics up. The 1/4ers have come up well, all in primer now and blocked.
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#44
|
||||
|
||||
https://goo.gl/photos/XtqRzxp9zYSo6hkH9
Ooops, Photo bucket not so easy to use,
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 Last edited by Gtozy; 11-28-2015 at 03:02 PM. Reason: pic didnt work |
#45
|
||||
|
||||
i have also been busy assembling the engine, it will be started and tuned on a dyno very soon. very much looking forward to that.
Specs are: * Stroke 4.25" * 10:1 CR * Bore 4.15" * Dished pistons * #16 Ported Heads- 72cc * Hyd Roller Cam 236I - 242E @ 0.50 (comp cams) * 1.5 ratio SS Roller Rockers * Flow Kooler * March Serpentine set * Dougs Headers * HEI Flame Thrower * Custom Pro Systems Carb (based on Holley 4150 - 950) https://goo.gl/photos/VaRHwTe2kRfYD6UJ6
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#46
|
||||
|
||||
Thought i might try to post some better engine pics.
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#47
|
||||
|
||||
Finally completing the 1/2" ss fuel lines means the chassis work is completed.
Sandblasted, and epoxy coated.
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#48
|
||||
|
||||
Rear end. Original 10 bolt, 3.08, Posi. Umi suspension.
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#49
|
||||
|
||||
One more!
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#50
|
||||
|
||||
Yesterday was a milestone day. The re "Marriage" occured with little fanfare. all bolted down nicely and door braces now removed - finally. Its been two years!!
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#51
|
||||
|
||||
NICE WORK!
|
#52
|
|||
|
|||
FANTSTIC.....tell us about the color? Original 68 color?
|
#53
|
||||
|
||||
Love that lift!
|
#54
|
||||
|
||||
the colour is Ruby Red, you may see it on current Mustangs. i wasnt to keen on the idea of a ford colour, but it really pops. It uses a red metallic base coat, tinted clear, then high solid clear. very pleased with it. car was originally Mayfair Maize.
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#55
|
||||
|
||||
Looks awesome Dave!
__________________
Your car must be very fast ! Because you were haulin ass when I passed you in my GTO. |
#56
|
|||
|
|||
Quote:
Did you make them yourself? |
#57
|
||||
|
||||
Like everything else, yep. The biggest challenge was to get the angles correct so it bolted up snug, so the long sides change angle a few degrees to allow for that. they worked a treat, glad you liked em.
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#58
|
||||
|
||||
So its been a while since updates, im still on the body work, so i thought i would share some detail on the process. Both doors needed new skins and a bit of work to the frames themselves. very fiddly, but im pleased with the result.
https://drive.google.com/open?id=0B8...zJFWElmYTRDUVE https://drive.google.com/open?id=0B8...zQ3akp2T1c2VTA https://drive.google.com/open?id=0B8...TFsSF9tZnVpd1E [URL="https://drive.google.com/open?id=0B8bp3uXXuZk_bHpyVzJJOFRadlU"] https://drive.google.com/open?id=0B8...HpyVzJJOFRadlU https://drive.google.com/open?id=0B8...Vd4UmVnWGJCQmM https://drive.google.com/open?id=0B8...E9GRUNqajBxNUE https://drive.google.com/open?id=0B8...TBNcGN4dHpqWE0
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#59
|
||||
|
||||
Hmm, not sure about the Google Drive pics, here are some from P Bucket instead
http://i1294.photobucket.com/albums/...ps0hxo7tz9.jpg http://i1294.photobucket.com/albums/...pszfo0ihih.jpg
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
#60
|
||||
|
||||
__________________
Dave. Check my build thread here http://forums.maxperformanceinc.com/...d.php?t=753467 |
Reply |
|
|