FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Front grills
so I damaged my driver's front grill as a boy long ago and was looking through my extras and noticed all basically the same except 1 right side grill. It didn't have rivets holding the outer trim to the main grill and had Abs burn stamped in it. looks same other than that detail ,but my originals are riveted on. Is this an aftermarket ot 71 maybe? The 1st pic is my original and second phase no rivet on the trim to attach to body also it has abs stamped on it. I have about 8 grills and this is only 1 that has no rivets holding chrome tri..to msin body. I want to clean up and paint them correct color and noticed this .Any advise?
|
#2
|
|||
|
|||
front grills
I plan on running these or removing tri.m and putting on my original
|
#3
|
|||
|
|||
front grills
I plan on running these or removing trim and putting on my original. Just curious why I got 1 odd ball non riveted one Following is a picture showi.g no.hole or support rivet.
|
#4
|
||||
|
||||
Hmmm
The grills on my 71 aren't riveted either
__________________
"Those poor souls have made the fatal mistake of surrounding us. Now we can fire in any direction" 1970 Trans Am RAIII 4 speed 1971 Trans Am 5.3 LM7 1977 Trans Am W72 Y82 1987 Grand National |
The Following User Says Thank You to 72projectbird For This Useful Post: | ||
#5
|
|||
|
|||
are they original? are riveted 1 year only part?
|
#6
|
||||
|
||||
I believe that often not all the mounting tabs were used.
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
#7
|
||||
|
||||
Are you sure that what you are seeing is a metal rivet? Does a magnet stick to it?
My grills look like they had a peg like protrusion on the tab that stuck into the hole on the grill. The pegs look to have snapped off at some point.
__________________
1969 TA RAIII M40 Auto Cameo White/ Std Blue Int 1970 TA RAIII M21 4-spd Lucy Blue/Std Black Int 1971 TA 455 HO M22 4-Spd Lucy Blue/Deluxe White Int |
#8
|
|||
|
|||
I believe the peg is the pin of the aluminum rivet
|
#9
|
|||
|
|||
tabs with rivets
This is a better picture from front looking up. I believe they are aluminum rivets with a metal.pin. each grill has 2. But the mystery question is why I have onevwith no hole on tab or rivets. and another member same on his 71? Is riveted grill a 1 year only item too? or maybe I got a donor early repop? I'm guessing. if repops trim isn't riveted I guess it's an easy fix just drill small hole install a rivet so the trim.doesnt rattle off. I have been told repops are nice and that original are built better so guess Im.confused and curious about this rivet factory install.
|
Reply |
|
|