FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
generator field nuts
Hello all, its been a while. I am in search of the nut size and pitch for my generator field wires. they look to be a regular nut but i have not had any luck buying them. wrong guesses on size. I have looked at the illustrated parts catalog and found the generator but nuts not listed Thanks
Last edited by 55Wagon; 05-22-2024 at 12:14 AM. Reason: add information to post |
#2
|
||||
|
||||
I was told, on another site, that they are 12/24 pitch. But, they didn't say what size. I can check a generator that came out of a 50 tomorrow to see if the nuts are still there.
__________________
Remember no one is perfect. Everyone's butt has a crack in it! |
#3
|
|||
|
|||
Thanks, Andy
|
#4
|
|||
|
|||
Post size is 12- threads per inch is 24- wrench size is 7/16
|
The Following User Says Thank You to stellar For This Useful Post: | ||
#5
|
|||
|
|||
Yes 12-24, I really had to look for them at the hardware store. they wanted to go from 10-24 straight to 1/4. Thanks for the help.
|
Reply |
|
|