FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Tool Options for Checking Roller Springs with Head On?
Hey Everybody,
What are some options for Roller Spring checking tools with heads on - more on the budget side? Thanks, Craig |
#2
|
|||
|
|||
https://forums.maxperformanceinc.com...&highlight=LSM
The Moroso valve seat pressure tester will be a lower price unit. We check new valve springs before they are installed with a Rimac machine at their verified installed height with their retainers in place. NEVER trust the published figures ! Once the baseline pressure is known from the bench tester we use a LSM tester and monitor them while on the cylinder heads. And note they can vary slightly as measured on the cylinder heads vs a bench tester. .
__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 ) Old information here: http://www.hotrod.com/articles/0712p...tiac-trans-am/ Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine) 5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension https://www.youtube.com/watch?v=qDoJnIP3HgE Last edited by Steve C.; 04-27-2024 at 12:30 PM. |
Reply |
|
|