FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
||||
|
||||
This is a comp cams solid roller cam for a SBF that I have a Cam Dr file for. It is 267.84 @ 0.050" lifter raise.
It was designed to use 1.65:1 rocker arms and I also show it with 1.8:1 rocker arms. _______I__N__T__A__K__E Rocker_Arm_Ratio_=_1.650_________Valve_Lash_=_0.02 100________Valve_Angle_=_20.0 VALVE_____Lift______Opens___Closes__Duration _________________Deg_BTDC__Deg_ABDC_____________Ar ea _________0.00000____47.69_|__84.37_|_312.05_|__61. 01 _________0.00600____44.55_|__80.80_|_305.35_|__60. 99 _________0.01000____42.73_|__78.67_|_301.39_|__60. 98 _________0.02000____38.71_|__73.99_|_292.70_|__60. 91 _________0.04000____32.32_|__66.84_|_279.16_|__60. 69 _________0.05000____29.68_|__63.94_|_273.61_|__60. 56 _________0.10000____18.96_|__52.59_|_251.56_|__59. 70 _________0.15000____10.52_|__43.84_|_234.35_|__58. 68 _________0.20000_____3.06_|__36.19_|_219.26_|__57. 27 _________0.25000____-3.97_|__29.07_|_205.10_|__55.41 _________0.30000___-10.85_|__22.20_|_191.36_|__53.71 _________0.35000___-17.79_|__15.20_|_177.41_|__51.04 _________0.40000___-24.96_|___7.98_|_163.03_|__48.74 _________0.45000___-32.52_|___0.38_|_147.86_|__45.30 _________0.50000___-40.80_|__-7.88_|_131.31_|__41.46 _________0.55000___-50.19_|_-17.26_|_112.55_|__36.16 _________0.60000___-61.45_|_-28.50_|__90.05_|__29.76 _________0.65000___-76.72_|_-43.55_|__59.73_|__20.32 _______I__N__T__A__K__E Rocker_Arm_Ratio_=_1.800_________Valve_Lash_=_0.02 290________Valve_Angle_=_20.0 VALVE_____Lift______Opens___Closes__Duration _________________Deg_BTDC__Deg_ABDC_____________Ar ea _________0.00000____47.69_|__84.37_|_312.06_|__66. 56 _________0.00600____44.80_|__81.08_|_305.88_|__66. 54 _________0.01000____43.10_|__79.10_|_302.20_|__66. 52 _________0.02000____39.34_|__74.72_|_294.07_|__66. 45 _________0.04000____33.29_|__67.87_|_281.16_|__66. 26 _________0.05000____30.76_|__65.12_|_275.87_|__66. 11 _________0.10000____20.53_|__54.24_|_254.76_|__65. 34 _________0.15000____12.51_|__45.89_|_238.39_|__64. 34 _________0.20000_____5.49_|__38.67_|_224.16_|__62. 90 _________0.25000____-1.07_|__31.99_|_210.92_|__61.52 _________0.30000____-7.41_|__25.64_|_198.23_|__59.54 _________0.35000___-13.72_|__19.31_|_185.59_|__57.54 _________0.40000___-20.15_|__12.82_|_172.67_|__54.88 _________0.45000___-26.79_|___6.13_|_159.33_|__52.28 _________0.50000___-33.83_|__-0.94_|_145.22_|__48.41 _________0.55000___-41.53_|__-8.61_|_129.86_|__44.67 _________0.60000___-50.19_|_-17.26_|_112.55_|__39.44 _________0.65000___-60.42_|_-27.46_|__92.12_|__33.13 _________0.70000___-73.66_|_-40.54_|__65.79_|__24.28 _________0.75000__-100.71_|_-66.52_|__12.77_|___4.51 Stan
__________________
Stan Weiss/World Wide Enterprises Offering Performance Software Since 1987 http://www.magneticlynx.com/carfor/carfor.htm David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software http://www.magneticlynx.com/DV Download FREE 14 Trial IOP / Flow Software http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php Pontiac Pump Gas List http://www.magneticlynx.com/carfor/pont_gas.htm Using PMD Block and Heads List http://www.magneticlynx.com/carfor/pont_pmd.htm |
The Following User Says Thank You to Stan Weiss For This Useful Post: | ||
Reply |
|
|