FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Too big main clearance after alignhone
Machine shop aligne honed and installed splayed 4 bolt mains. I see they made the bores on the upper limit, around 3.1890.
Cap number 4 is outside toleranse at 3.1894. I get these main clerances now with std 113M bearings: 1 .0043 2 .0047 3 .0035 4 .0051 5 .0035 What to do now? I can only find 0.0010 bearings. With 0.0020 and 0.0030 also I could fix this. Dont want to grind my brand new, perfect, Molnar crank if I dont have to. |
|
|