FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#21
|
||||
|
||||
Quote:
Quote:
But honestly, I don't remember it smelling this bad in the past so I'll remain optimistic. But then again, it never ran well until Jeff fixed the carb and I got the distributor working right. I haven't used that Marvel stuff since the 70s... thanks for that idea. Mike |
#22
|
|||
|
|||
Any carb bought needs the idle mixture adjusted on the engine it is going to be used on.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2 373 gears 3200 Continental Convertor best et 10.679/127.5/1.533 60ft 308 gears best et 10.76/125.64/1.5471 |
#23
|
|||
|
|||
I suggest adjusting the idle mixture. I can't see how someone else can set the idle mixture before bolt on unless they have the identical engine and timing at idle.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2 373 gears 3200 Continental Convertor best et 10.679/127.5/1.533 60ft 308 gears best et 10.76/125.64/1.5471 |
The Following 2 Users Say Thank You to ta man For This Useful Post: | ||
Reply |
|
|