[54nomore]

Hi all,

I'm working on a '68 Quadrajet, Carter #4887S (Rochester 7028262).
Trying to find out what secondary metering rods and hanger were in it originally. Primary jets and rods are supposed to be #73 and #43B. Would like to confirm that that is correct also, as that is not what was in it.

Thanks, Ron.

[Kenth]

Carter 4887S is actually an aftermarket replacement for all 1969 Pontiac 350, 400, 428 Qjets, exc. Ram Air, as it has the primary pull-over enrichment system and an adjustable idle airbleed under the triangular whasher.
Here is the factory recipe:

[54nomore]

Originally Posted by Kenth

Carter 4887S is actually an aftermarket replacement for all 1969 Pontiac 350, 400, 428 Qjets, exc. Ram Air, as it has the primary pull-over enrichment system and an adjustable idle airbleed under the triangular whasher.
Here is the factory recipe:

Thank you, Kenth!

This carb was on a '68 YE engine that I acquired several years ago, so I always assumed it was the original carb. Looks like the only deviation was the "J" hanger, as it turns out. 74 and 46(single taper) and BE's were all present.