FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
WTB #18 heads from 1968 350.
Anyone have a pair of #18 casting cylinder heads for a 1968 350?
Thanks,
__________________
Jim www.raceV8s.com 1972 Trans Am drag car, 3300lbs, 468 ci, Iron D ports, 428 block, 9799103 crank, 9.48 @ 143mph, 6.0 @ 114mph in the 1/8th. |
#2
|
|||
|
|||
I think those are 350HO heads. I junked a 68 Lemans 350HO automatic many years ago, so I might still have a set. Are you looking for a specific date range?
|
#3
|
||||
|
||||
No specific date range just pursuing a decent, rebuildable set of #18s. Prefer untouched, low mileage set that had been disassembled and cleaned...but will consider all.
__________________
Jim www.raceV8s.com 1972 Trans Am drag car, 3300lbs, 468 ci, Iron D ports, 428 block, 9799103 crank, 9.48 @ 143mph, 6.0 @ 114mph in the 1/8th. |
#4
|
||||
|
||||
Still looking...
__________________
Jim www.raceV8s.com 1972 Trans Am drag car, 3300lbs, 468 ci, Iron D ports, 428 block, 9799103 crank, 9.48 @ 143mph, 6.0 @ 114mph in the 1/8th. |
#5
|
|||
|
|||
After my parents passed, I had to move a bunch of parts I had stored on their property. I had a number of engines I saved for things like timing chain covers, oil pans and miscellaneous hardware. I hauled most of it to the scrap yard, but I know I pulled of the intake off the 68HO. I don't remember if I pulled the heads or not. My parts are stored a couple of hours away. I will check next time I go down.
|
#6
|
||||
|
||||
# 18 Heads
I have a set here Jim.
|
#7
|
|||
|
|||
#18 heads
I have a set but you need to take the whole engine. 😬 Currently on a 400. I have too many engines and would love to make room.
|
#8
|
||||
|
||||
This person is brand new to the board and is responding to an older discussion, which can be considered suspicious...we've had a rash of scammers recently, joining up in attempts to get people to send them money, so as a precaution they've been suspended for now. If they are legitimate, they can send the moderators a note to argue their case and we can reinstate them, but for now I don't recommend responding to them.
|
The Following 4 Users Say Thank You to Stuart For This Useful Post: | ||
#9
|
|||
|
|||
Are you still looking for heads I believe I have a set of those I'm new here
|
#10
|
||||
|
||||
Wow what are the chances?
Brand new member with exactly what you’re looking for. |
The Following User Says Thank You to b-man For This Useful Post: | ||
#11
|
||||
|
||||
Quote:
i had a '71 2-barrel 455, out of a Safari wagon, that had #98 heads on it. |
#12
|
||||
|
||||
What are the date codes?
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
#13
|
|||
|
|||
those dont look like #18 heads...
|
#14
|
||||
|
||||
Still looking for a single or a pair of #18 heads. Norwalk bound. Thanks to those that responded and for those that are reading.
__________________
Jim www.raceV8s.com 1972 Trans Am drag car, 3300lbs, 468 ci, Iron D ports, 428 block, 9799103 crank, 9.48 @ 143mph, 6.0 @ 114mph in the 1/8th. |
#15
|
|||
|
|||
How about #47 heads? 1969 heads
|
#16
|
||||
|
||||
Grandam1979,
Thanks for the offer however, I need/want the #18 heads for this project.
__________________
Jim www.raceV8s.com 1972 Trans Am drag car, 3300lbs, 468 ci, Iron D ports, 428 block, 9799103 crank, 9.48 @ 143mph, 6.0 @ 114mph in the 1/8th. |
#17
|
||||
|
||||
I have a set will PM you
|
#18
|
|||
|
|||
I have a set of #18 heads. Are you still looking?
|
Reply |
|
|