| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
03-20-2023, 08:41 PM
|
||||
|
||||
offy dual quad water neck
working on a friends 66 2+2 with a offy dual quad the water neck that was on it was not fitting right i purchased a swivel neck online but it leeks the neck screws into the housing (dumb idea) anyone have any other ideas
|
|
#2
03-20-2023, 10:05 PM
|
|||
|
|||
|
might not be able to use sideways carbs?Looks like linkage is in the way.Tom
|
|
#3
03-20-2023, 11:35 PM
|
|||
|
|||
|
I thought those intakes had a center divider not an open plenum
|
|
#4
03-21-2023, 12:09 AM
|
||||
|
||||
|
Have you searched the web for other setups with this manifold? You might need to modify the linkage?
Sent from my iPhone using Tapatalk |
|
#5
03-21-2023, 06:01 AM
|
||||
|
||||
|
I'am with Tom, I don't think those intakes where ever designed for sideways Carbs to be fitted to them, and this is a comment from someone who use to have one of those intakes.
If the car has a scoop I would think about selling that Intake and getting a Wensler tunnel ram. These have more of everything from the bottom of the power band to the top.
__________________
I do stuff for reasons. |
|
#6
03-21-2023, 09:41 AM
|
||||
|
||||
|
I got by with sideways on dual quad but there was a primary on each side of divided plenum. Offy linkage.
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
|
#7
03-21-2023, 10:35 AM
|
|||
|
|||
|
I can't tell by your picture which side of the radiator the inlet is on. I used to do offy setups for people and used various water necks. You may have to try several but the almost straight up one worked for me most of the time. The setups I did used AFBs not Holleys.
|
|
#8
03-21-2023, 10:59 AM
|
|||
|
|||
|
The picture is very hard to see. But possibly the billet housing from Nightmare Performance in CT would fit. The hose neck is almost straight up and the housing is cut-back around the area where their might be interference. Check their web site.
|
|
#9
03-21-2023, 11:05 AM
|
|||
|
|||
|
looks to me the linkage is right above the thermostat.Tom
|
|
#10
03-21-2023, 03:22 PM
|
|||
|
|||
|
I failed to see the linkage yes something needs to be done there.
|
|
#11
03-21-2023, 05:41 PM
|
||||
|
||||
|
thermostat
bought this thing, it would work great if it did'nt leak from the hose end thats threaded, i might weld it together into the housing
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
