FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
70 GTO rear speaker shelf corner panel
Hey Guys,
I'm needing one and possibly both sides of these for my 70 GTO https://www.summitracing.com/parts/gmk-4032712680r That part number on Google always shows it as being for a 68-72 Chevelle but it looks identical to the ones on my 70 so I was wondering if any has ever used them on a GTO and if so, did they fit properly? Thanks! |
#2
|
||||
|
||||
The simplest way that I have found to see what parts cross over is to look up both applications on the Year One site. If the part numbers match, so does the part.
|
The Following User Says Thank You to 400 4spd. For This Useful Post: | ||
#3
|
|||
|
|||
Yes that would make sense so I took your advice and looked but they don't seem to carry this panel for either model.
I know that the most minor detail in design can change a part number so I was hoping that someone at some time had tried the "Chevelle" one with success or could at least comment on what adjustments had to be made for it to fit. |
#4
|
||||
|
||||
I'll tell you what I will do. If you are willing to order them and ship them to me, I'll compare them to a 1970 GTO that we are restoring. If different, I will work with you make the needed modifications.
|
The Following User Says Thank You to 400 4spd. For This Useful Post: | ||
#5
|
|||
|
|||
Don't know if you found a solution yet but I had the same problem on my 70 gto. Package tray corner was rotten they are 3 PC. The far bottom corners don't match I used 68/72 Chevelle tray . My speaker holes were very thin so. I cut what I needed. But corners need to be fabricated
|
#6
|
|||
|
|||
68/72 Chevelle pcg. Tray middle sec. Is as close as you can buy the 2 ends are to (they are 2 PC. & go down The wheel house. Corners at windows need to be fabricated . I only cut what I needed. It's a little dance ,just need patients
|
#7
|
|||
|
|||
Thanks for the offer 400 4spd and thanks for the confirmation Glennhill.
I've been doing some research and I was starting to think that the difference was going to be at the rear window. It's not really a big deal to mod, it will just take a little time and patients like you say. At least now I'll have an idea of what Ill be getting into so thank you very much and a Merry Christmas to each of you! |
Reply |
|
|